# Dynamo says "run complete" but nothings shows up **URL:** \ **Category:** Revit\ **Created:** [November 4, 2020, 9:31am UTC](https://forum.dynamobim.com/t/dynamo-says-run-complete-but-nothings-shows-up/56903 "2020-11-04T09:31:09Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Brendan\_Cassidy](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/brendan_cassidy/32/7685_2.png) [@Brendan\_Cassidy](https://forum.dynamobim.com/u/Brendan_Cassidy)\ **Post date:** [November 4, 2020, 11:12am UTC](https://forum.dynamobim.com/t/dynamo-says-run-complete-but-nothings-shows-up/56903/2 "2020-11-04T11:12:17Z")
The image does not tell us much about what your script is doing, what is the expected output and does not show us anything about the logic of your script. Generally speaking you will see results in the graph space not in the logs. > [@How to get help on the Dynamo forums](https://forum.dynamobim.com/t/how-to-get-help-on-the-dynamo-forums/4677): > > One of the main goals of the Dynamo community is to help others. One way to do that is by answering your questions. But to get the right answer, you’ll first have to ask your question in the right way. Although people are generally very helpful, there are things you can do to improve your chances of getting good and quick answers. Below you will find some suggestions on how to achieve that. Do not think of these suggestions as rules and especially do not take them as a guarantee of getting an an… --- _[View the full topic](https://forum.dynamobim.com/t/dynamo-says-run-complete-but-nothings-shows-up/56903)._