# Dynamo Grid example (non-uniform)

**URL:** <https://forum.dynamobim.com/t/dynamo-grid-example-non-uniform/167>\
**Category:** Packages\
**Created:** [June 15, 2013, 12:46am UTC](https://forum.dynamobim.com/t/dynamo-grid-example-non-uniform/167 "2013-06-15T00:46:01Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dave\_Baldacchino](https://avatars.discourse-cdn.com/v4/letter/d/bbe5ce/32.png) [@Dave\_Baldacchino](https://forum.dynamobim.com/u/Dave_Baldacchino)\
**Post date:** [June 15, 2013, 12:46am UTC](https://forum.dynamobim.com/t/dynamo-grid-example-non-uniform/167/1 "2013-06-15T00:46:01Z")

</div>

This is my first example I built from scratch. I was looking at the grid sample and decided to kick it up a notch. It's intersting how you develop the node network: you add and modify in a logical fashion but in the end you barely recognize (and comprehend) the finished work (it's like when building those complex Excel spreadsheets with a lot of calculations!)

  

![](http://dynamobim.com/wp-content/uploads/discussions/1-1000/744-Gridofpoints.jpg)

---

<div class="post-metadata">

**Author:** ![Dave\_Baldacchino](https://avatars.discourse-cdn.com/v4/letter/d/bbe5ce/32.png) [@Dave\_Baldacchino](https://forum.dynamobim.com/u/Dave_Baldacchino)\
**Post date:** [June 16, 2013, 11:43am UTC](https://forum.dynamobim.com/t/dynamo-grid-example-non-uniform/167/2 "2013-06-16T11:43:34Z")

</div>

Something is wonky when .dyn files are saved while Run Automatically is on, or perhaps this was a one-off case, but the above probably won't work as it'll be very slow to open and will result in additional incorrect connections/wires once open. I made some more tweaks and this version should work, file attached.

  

  

![](http://dynamobim.com/wp-content/uploads/discussions/1-1000/747-CantedGrid.jpg?width=721)

---

<div class="post-metadata">

**Author:** ![shashank.baganeACM](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@shashank.baganeACM](https://forum.dynamobim.com/u/shashank.baganeACM)\
**Post date:** [February 28, 2022, 9:12am UTC](https://forum.dynamobim.com/t/dynamo-grid-example-non-uniform/167/3 "2022-02-28T09:12:38Z")

</div>

Hi @Dave_Baldacchino Can you please tell me how to create a non uniform grids as the uploaded graph is not visible in this post. May be it is corrupted or something went wrong. I am not able to see the graph.

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [February 28, 2022, 9:15am UTC](https://forum.dynamobim.com/t/dynamo-grid-example-non-uniform/167/4 "2022-02-28T09:15:19Z")

</div>

Hi @shashank.baganeACM …you actuelly answer a post there are almost 10 years old ?

---

<div class="post-metadata">

**Author:** ![shashank.baganeACM](https://avatars.discourse-cdn.com/v4/letter/s/35a633/32.png) [@shashank.baganeACM](https://forum.dynamobim.com/u/shashank.baganeACM)\
**Post date:** [February 28, 2022, 9:16am UTC](https://forum.dynamobim.com/t/dynamo-grid-example-non-uniform/167/5 "2022-02-28T09:16:13Z")

</div>

Oh sorry @sovitek My mistake. I didn’t see that.

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [February 28, 2022, 9:17am UTC](https://forum.dynamobim.com/t/dynamo-grid-example-non-uniform/167/6 "2022-02-28T09:17:14Z")

</div>

no worries 😉 just information…but i dont think there are good luck here 😉