# Dynamo Grid Dimensions

**URL:** <https://forum.dynamobim.com/t/dynamo-grid-dimensions/4905>\
**Category:** Revit\
**Created:** [July 6, 2016, 9:45pm UTC](https://forum.dynamobim.com/t/dynamo-grid-dimensions/4905 "2016-07-06T21:45:26Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![han.cassone](https://avatars.discourse-cdn.com/v4/letter/h/258eb7/32.png) [@han.cassone](https://forum.dynamobim.com/u/han.cassone)\
**Post date:** [July 6, 2016, 9:45pm UTC](https://forum.dynamobim.com/t/dynamo-grid-dimensions/4905/1 "2016-07-06T21:45:26Z")

</div>

I am new in to Dynamo and I am currently trying to create a grid that has set dimensions (I understand that you can’t give dimensions but I am using revit and want to put the grid to the ceiling). I am currently using a code block to define the start stop and range points, however, instead of the range being how many points appear I want the range to be the distance or even scale between the points but I don’t know if this is possible? Can you please tell me if it is possible and how I can approach this? Thank you

---

<div class="post-metadata">

**Author:** ![Chris\_Melander](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/chris_melander/32/8638_2.png) [@Chris\_Melander](https://forum.dynamobim.com/u/Chris_Melander)\
**Post date:** [July 6, 2016, 10:23pm UTC](https://forum.dynamobim.com/t/dynamo-grid-dimensions/4905/2 "2016-07-06T22:23:10Z")

</div>

Welcome to the forum! If I understand your question correctly, you are just trying to write a code block that creates a series of points based on a set dimension instead of divisions, correct? You could just write something like this:

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/a/abd1bc4e1299697312aa2a2a6cca9a3726762069.png)

Does that help?

---

<div class="post-metadata">

**Author:** ![Chris\_Melander](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/chris_melander/32/8638_2.png) [@Chris\_Melander](https://forum.dynamobim.com/u/Chris_Melander)\
**Post date:** [July 6, 2016, 10:25pm UTC](https://forum.dynamobim.com/t/dynamo-grid-dimensions/4905/3 "2016-07-06T22:25:16Z")

</div>

To make it a grid, just plug it into the x and y and set the lacing to cross product:

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/3/3779d84526b44880662f5e9c8a43a467c01d8baa.png)

---

<div class="post-metadata">

**Author:** ![han.cassone](https://avatars.discourse-cdn.com/v4/letter/h/258eb7/32.png) [@han.cassone](https://forum.dynamobim.com/u/han.cassone)\
**Post date:** [July 6, 2016, 10:58pm UTC](https://forum.dynamobim.com/t/dynamo-grid-dimensions/4905/4 "2016-07-06T22:58:48Z")

</div>

Thank you so much! That helps heaps