# Doors from CAD placement is incorrect **URL:** \ **Category:** Revit\ **Tags:** geometry, dynamo, autocad\ **Created:** [August 3, 2023, 10:23am UTC](https://forum.dynamobim.com/t/doors-from-cad-placement-is-incorrect/92491 "2023-08-03T10:23:46Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![arincakkin](https://avatars.discourse-cdn.com/v4/letter/a/a6a055/32.png) [@arincakkin](https://forum.dynamobim.com/u/arincakkin)\ **Post date:** [August 3, 2023, 10:23am UTC](https://forum.dynamobim.com/t/doors-from-cad-placement-is-incorrect/92491/1 "2023-08-03T10:23:46Z")
Hey community. I got a dynamo set up to create doors from CAD files. But sometime placements is not accurate. How can i make it correct? [door örnek.rvt](https://forum.dynamobim.com/uploads/short-url/kJ8OJo6WrbBkvbH2DC9525xTYj4.rvt) (5.3 MB) [**CAD** \_ (1).dyn|attachment](https://forum.dynamobim.com/uploads/short-url/sNE2WJE5O52zYN75BMtbEaUdOvr.dyn) (77.4 KB) [Zemin Kat - mimarr.dwg](https://forum.dynamobim.com/uploads/short-url/ilbz1XeSnibGK9RjNFUjjJqU2rb.dwg) (147.6 KB) ![doors issue](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/2/924ced7561c728a3e0ac94a6c6b379692d296179.png) ---
**Author:** ![arincakkin](https://avatars.discourse-cdn.com/v4/letter/a/a6a055/32.png) [@arincakkin](https://forum.dynamobim.com/u/arincakkin)\ **Post date:** [August 3, 2023, 11:21am UTC](https://forum.dynamobim.com/t/doors-from-cad-placement-is-incorrect/92491/2 "2023-08-03T11:21:17Z")
ANd secondly how do i put a filter to be able to only get dots between CAD lines and wall intersection. On this example i am having all the dots so script create doors on that dots. [**CAD** \_ (1)-Doors4.dyn|attachment](https://forum.dynamobim.com/uploads/short-url/53Q1Jd3n7fsPWMFJINQciAphbiH.dyn) (89.0 KB) ![doors issue3](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/6/368d2c4ee1655b363e9d5eb3d695a252cc4da076.png)