# Distinguish shared and system parameters inside dynamo

**URL:** <https://forum.dynamobim.com/t/distinguish-shared-and-system-parameters-inside-dynamo/85557>\
**Category:** Revit\
**Tags:** revit\
**Created:** [January 31, 2023, 9:04am UTC](https://forum.dynamobim.com/t/distinguish-shared-and-system-parameters-inside-dynamo/85557 "2023-01-31T09:04:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![MichaelWolff](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@MichaelWolff](https://forum.dynamobim.com/u/MichaelWolff)\
**Post date:** [January 31, 2023, 9:04am UTC](https://forum.dynamobim.com/t/distinguish-shared-and-system-parameters-inside-dynamo/85557/1 "2023-01-31T09:04:37Z")

</div>

I am on a project that was started in a non-localized Revit version. To cope with the project requirements some shared parameters were introduced that are exact copies of what the Revit translators have come up with for ‘area’ or ‘perimeter’.  
Inside Dynamo I have found no way to tell whether the GetParameterValueByName-node has picked up the system or the shared parameter.

Is there a (preferably out of the box) way?

---

<div class="post-metadata">

**Author:** ![Alban\_de\_Chasteigner](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/alban_de_chasteigner/32/39650_2.png) [@Alban\_de\_Chasteigner](https://forum.dynamobim.com/u/Alban_de_Chasteigner)\
**Post date:** [January 31, 2023, 9:20am UTC](https://forum.dynamobim.com/t/distinguish-shared-and-system-parameters-inside-dynamo/85557/2 "2023-01-31T09:20:08Z")

</div>

Hi,

I don’t think you can only use OOTB nodes.  
For your information, system parameters can also be called with their Built In Parameter name.

You can use the _Element Parameter Properties_ node from the _Genius Loci_ package to obtain all the parameters of an element and filter the system parameters with the IsUserCreated or IsSharedParmeter outputs.

---

<div class="post-metadata">

**Author:** ![MichaelWolff](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@MichaelWolff](https://forum.dynamobim.com/u/MichaelWolff)\
**Post date:** [January 31, 2023, 9:23am UTC](https://forum.dynamobim.com/t/distinguish-shared-and-system-parameters-inside-dynamo/85557/3 "2023-01-31T09:23:51Z")

</div>

Thanks. I will stop looking now.

---

<div class="post-metadata">

**Author:** ![MichaelWolff](https://avatars.discourse-cdn.com/v4/letter/m/ecae2f/32.png) [@MichaelWolff](https://forum.dynamobim.com/u/MichaelWolff)\
**Post date:** [June 30, 2023, 12:16pm UTC](https://forum.dynamobim.com/t/distinguish-shared-and-system-parameters-inside-dynamo/85557/4 "2023-06-30T12:16:10Z")

</div>

Autodesk’s Konrad.O did figure this one out - with vanilla Dynamo. Will even work in Dynamo 1.3

> **[Gleichlautende Parameter auseinanderhalten](https://forums.autodesk.com/t5/revit-bim-360-deutsch/gleichlautende-parameter-auseinanderhalten/m-p/11718259#M14700)**
>
> Hallo Expertenteam,   das ist bestimmt ganz leicht und ich finde es nur gerade nicht. Wir haben ein Projekt, das von einem nicht-deutsch lokalisierten Bearbeiter vorgearbeitet wurde. Es wurde ein Gemeinsam Genutzter Parameter namens "Fläche"...
