# Dimension from shaft to grid

**URL:** <https://forum.dynamobim.com/t/dimension-from-shaft-to-grid/66441>\
**Category:** Revit\
**Created:** [July 22, 2021, 4:44pm UTC](https://forum.dynamobim.com/t/dimension-from-shaft-to-grid/66441 "2021-07-22T16:44:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![filribeiro](https://avatars.discourse-cdn.com/v4/letter/f/dfb087/32.png) [@filribeiro](https://forum.dynamobim.com/u/filribeiro)\
**Post date:** [July 22, 2021, 4:44pm UTC](https://forum.dynamobim.com/t/dimension-from-shaft-to-grid/66441/1 "2021-07-22T16:44:36Z")

</div>

Hi,

I have an idea for a dynamo routine that i think would be very helpful, but I don’t know if it is possible to achieve.

Is it possible to make a routine to automatically generate dimensions from shaft limits to nearest grid?

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [July 22, 2021, 4:47pm UTC](https://forum.dynamobim.com/t/dimension-from-shaft-to-grid/66441/2 "2021-07-22T16:47:47Z")

</div>

Yeah what a great idea 😉 if you take a search here i am sure you will get a lot of hits, for this very helpful trick 😉

---

<div class="post-metadata">

**Author:** ![filribeiro](https://avatars.discourse-cdn.com/v4/letter/f/dfb087/32.png) [@filribeiro](https://forum.dynamobim.com/u/filribeiro)\
**Post date:** [July 22, 2021, 5:02pm UTC](https://forum.dynamobim.com/t/dimension-from-shaft-to-grid/66441/3 "2021-07-22T17:02:56Z")

</div>

Hi sovitek, thanks for your quick response.

The truth is that i started with that search, but i couldn’t find any answers. There are some posts but with no answers.

Maybe someone with the same interest and with more knowledge can help me with this.

Many thanks.