# Detail item place error
**URL:** https://forum.dynamobim.com/t/detail-item-place-error/96199
**Category:** Revit
**Tags:** revit, geometry, dynamo
**Created:** [December 8, 2023, 10:13am UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199 "2023-12-08T10:13:09Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@daniils.klekers](https://forum.dynamobim.com/u/daniils.klekers)
#### Post date: [December 8, 2023, 10:13am UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/1 "2023-12-08T10:13:09Z")
Greetings!
I’m trying to create dynamo script to set detail item on every wall in plan. Get out curves from walls and material name, im trying to place my prepared detail item. But in the end i have error and don’t know what to do.
There is screenshot in attachment to understand the logic.
Thank you!
---
### Author:  [@sovitek](https://forum.dynamobim.com/u/sovitek)
#### Post date: [December 8, 2023, 10:28am UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/2 "2023-12-08T10:28:32Z")
Hi @daniils.klekers that node expect a linebased family, not sure you family is linebased
---
### Author:  [@sovitek](https://forum.dynamobim.com/u/sovitek)
#### Post date: [December 8, 2023, 10:54am UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/3 "2023-12-08T10:54:37Z")
and be sure you have dynamoironpython package installed…
---
### Author:  [@daniils.klekers](https://forum.dynamobim.com/u/daniils.klekers)
#### Post date: [December 8, 2023, 11:33am UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/4 "2023-12-08T11:33:28Z")
Thank you for your reply.
The last DynamoIronPython is installed.
To double check yourself i just created new DetailItem line based. Still have this problem
---
### Author:  [@sovitek](https://forum.dynamobim.com/u/sovitek)
#### Post date: [December 8, 2023, 11:38am UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/5 "2023-12-08T11:38:21Z")
I guees the latest is 2.5, is that detailcomponent.by curve from clockwork ? the latest there should be 2.6
if you want you could share the linebased detail family and we can test
---
### Author:  [@daniils.klekers](https://forum.dynamobim.com/u/daniils.klekers)
#### Post date: [December 8, 2023, 12:37pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/6 "2023-12-08T12:37:41Z")
[CMB\_[detail\_items]\_Apdares\_darbu\_linija.rfa](https://forum.dynamobim.com/uploads/short-url/eBFBlExm4C04sLdmYM1UX931rcR.rfa) (388 KB)
Sure it would be nice to check.
---
### Author:  [@sovitek](https://forum.dynamobim.com/u/sovitek)
#### Post date: [December 8, 2023, 12:51pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/7 "2023-12-08T12:51:12Z")
hmmm seems to work here so it isnst the family…and your clockwork is version 2.6 ?
---
### Author:  [@daniils.klekers](https://forum.dynamobim.com/u/daniils.klekers)
#### Post date: [December 8, 2023, 12:58pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/8 "2023-12-08T12:58:23Z")
Yes, Clockwork 2.6
IronPython 2.5
just tried on lines as in your example and its not work also.
So problem not in curves, not in family type
Not in view…
But why?
---
### Author:  [@sovitek](https://forum.dynamobim.com/u/sovitek)
#### Post date: [December 8, 2023, 1:02pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/9 "2023-12-08T13:02:14Z")
yeah all looks good…then im not sure…probably @jacob.small know something here 😉
---
### Author:  [@sovitek](https://forum.dynamobim.com/u/sovitek)
#### Post date: [December 8, 2023, 1:26pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/10 "2023-12-08T13:26:15Z")
PS does it work if you open a new blank project and try ?
---
### Author:  [@daniils.klekers](https://forum.dynamobim.com/u/daniils.klekers)
#### Post date: [December 8, 2023, 1:30pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/11 "2023-12-08T13:30:19Z")
I’ll try
also noticed that i have clockwork error. Does it give any information about my problem?
I have already tried to reinstall, but it doesn’t help
---
### Author:  [@jacob.small](https://forum.dynamobim.com/u/jacob.small)
#### Post date: [December 8, 2023, 1:30pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/12 "2023-12-08T13:30:58Z")
Extract the contents of the detail component creation node and test them in your graph. The Python is almost certainly throwing an error but we can’t see it as it’s built in such a way as to prevent exposing the warning and just return null.
Focus on one wall in one view with one family type for now.
---
### Author:  [@sovitek](https://forum.dynamobim.com/u/sovitek)
#### Post date: [December 8, 2023, 1:32pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/13 "2023-12-08T13:32:11Z")
probably you have a conflict with other packages…do you example have Bakery installed ?
---
### Author:  [@daniils.klekers](https://forum.dynamobim.com/u/daniils.klekers)
#### Post date: [December 8, 2023, 1:44pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/15 "2023-12-08T13:44:23Z")
Even with one line its not working for me.
---
### Author:  [@daniils.klekers](https://forum.dynamobim.com/u/daniils.klekers)
#### Post date: [December 8, 2023, 1:44pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/16 "2023-12-08T13:44:57Z")
Here is my Error notification
No, i don’t have Bakery
---
### Author:  [@sovitek](https://forum.dynamobim.com/u/sovitek)
#### Post date: [December 8, 2023, 1:55pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/17 "2023-12-08T13:55:08Z")
hmmm try dissable your addins [you can use diroots appmanager for that…remove all your packages to an other folder except clockwork, dynamoironpthon and try
---
### Author:  [@daniils.klekers](https://forum.dynamobim.com/u/daniils.klekers)
#### Post date: [December 8, 2023, 2:13pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/18 "2023-12-08T14:13:05Z")
even with your method i have null. Seems like i have problem with packages. Ill try to reinstall all packages…
---
### Author:  [@jacob.small](https://forum.dynamobim.com/u/jacob.small)
#### Post date: [December 8, 2023, 4:17pm UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/19 "2023-12-08T16:17:10Z")
You need to reveiw the warnings by extracting the contents of the custom node.
1. Double click on the DetailComponent.ByCurve node to edit the custom node.
2. Select everything (ctrl+a).
3. Copy the selection (ctrl+c).
4. Switch back to your graph.
5. Paste in the contents.
6. Wire your Line, FamilyType, and View inputs into the pasted content.
7. Address the warnings which will be surfaced in the string of nodes.
---
### Author:  [@daniils.klekers](https://forum.dynamobim.com/u/daniils.klekers)
#### Post date: [December 9, 2023, 11:10am UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/20 "2023-12-09T11:10:29Z")
Thank you!
It helps to understand that problem in curves.
I’ll try to solve it
---
### Author:  [@daniils.klekers](https://forum.dynamobim.com/u/daniils.klekers)
#### Post date: [December 9, 2023, 11:18am UTC](https://forum.dynamobim.com/t/detail-item-place-error/96199/21 "2023-12-09T11:18:18Z")
But anyway something went wrong…
[Next page](https://forum.dynamobim.com/t/detail-item-place-error/96199.md?page=2)