# Detail 2d rebar **URL:** \ **Category:** Revit\ **Created:** [November 3, 2020, 9:28am UTC](https://forum.dynamobim.com/t/detail-2d-rebar/56856 "2020-11-03T09:28:46Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Tom\_Kunsman](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/tom_kunsman/32/133796_2.png) [@Tom\_Kunsman](https://forum.dynamobim.com/u/Tom_Kunsman)\ **Post date:** [November 3, 2020, 12:14pm UTC](https://forum.dynamobim.com/t/detail-2d-rebar/56856/2 "2020-11-03T12:14:11Z")
Welcome to the forums! Perhaps some of these links will help you: > [@Rebar Shape for Dynamo 4 Rebar Package](https://forum.dynamobim.com/t/rebar-shape-for-dynamo-4-rebar-package/12260): > > Hi All, I’m trying to create a wall reinforcement using a custom rebar shape. I’m using Dynamo 4 rebar and BIM4Struc packages, but I can’t find a node qich select the rebar shape to use. Does anyone came with some solution? Thanks in advance. > [@Rebar Shape Parameters](https://forum.dynamobim.com/t/rebar-shape-parameters/18291): > > Hi All, I’m struggling with a rebar shape parameters. This is the case: If I create a rebar element like the one from the image below: In red, It shows that the rebar shape is M\_02 and it has hooks at both ends. Its dimension parameters are (A -\> R), which the sum of them plus 2 times the bending radius is the Total Length: [image] However, when I create a rebar using Dynamo4Rebar package, like the one in the next image: it has only the A parameter and the total leng… > [@Get rebar shape name string](https://forum.dynamobim.com/t/get-rebar-shape-name-string/32661): > > Hi guys, do you have any idea why i can’t get the rebar shape name. I want to make a correlation between the rebar shape name and a detail item. Thank you very much! Once you have the rebar shape, what are you trying to do? Are you making a bend diagram? --- _[View the full topic](https://forum.dynamobim.com/t/detail-2d-rebar/56856)._