# Curves offset in direction **URL:** \ **Category:** Uncategorized\ **Created:** [September 8, 2021, 7:16pm UTC](https://forum.dynamobim.com/t/curves-offset-in-direction/67987 "2021-09-08T19:16:59Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![maheeramurad](https://avatars.discourse-cdn.com/v4/letter/m/7cd45c/32.png) [@maheeramurad](https://forum.dynamobim.com/u/maheeramurad)\ **Post date:** [September 8, 2021, 7:16pm UTC](https://forum.dynamobim.com/t/curves-offset-in-direction/67987/1 "2021-09-08T19:16:59Z")
hi. i want draw curves offset at 6’ on the inside of the floor. i tried this but i am getting offset on the inside and outside as well ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/f/9f2700a786df4abf696c9e47cf6a014ba3ebdddb.png) ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/2/a/2a885a802176ff4c7a8de17fe9005828081bc1c2.png) when i give the distance -6,0 then no offset draw at openings. ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/9/e91590f05ce6990be23d426d510d27bebc28c57f.png) ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/2/d282157bcaab0d2aa3cfac0231394105d7fe4a91.png) ---
**Author:** ![Robert\_Younger](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/robert_younger/32/205603_2.png) [@Robert\_Younger](https://forum.dynamobim.com/u/Robert_Younger)\ **Post date:** [September 8, 2021, 8:10pm UTC](https://forum.dynamobim.com/t/curves-offset-in-direction/67987/3 "2021-09-08T20:10:32Z")
How large is the opening? If it’s 12ft or less then the interior offset will fail. ---
**Author:** ![maheeramurad](https://avatars.discourse-cdn.com/v4/letter/m/7cd45c/32.png) [@maheeramurad](https://forum.dynamobim.com/u/maheeramurad)\ **Post date:** [September 8, 2021, 8:14pm UTC](https://forum.dynamobim.com/t/curves-offset-in-direction/67987/4 "2021-09-08T20:14:40Z")
its 16’