# Creating wall from dynamo surfaces

**URL:** <https://forum.dynamobim.com/t/creating-wall-from-dynamo-surfaces/16522>\
**Category:** Uncategorized\
**Tags:** clockwork, dynamo\
**Created:** [November 15, 2017, 3:54pm UTC](https://forum.dynamobim.com/t/creating-wall-from-dynamo-surfaces/16522 "2017-11-15T15:54:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Der\_Jon](https://avatars.discourse-cdn.com/v4/letter/d/2acd7d/32.png) [@Der\_Jon](https://forum.dynamobim.com/u/Der_Jon)\
**Post date:** [November 15, 2017, 3:54pm UTC](https://forum.dynamobim.com/t/creating-wall-from-dynamo-surfaces/16522/1 "2017-11-15T15:54:54Z")

</div>

What’s the best way of creating walls from surfaces created in dynamo?  
I’ve already tried the built-in Wall.ByFace and the one from Clockwork. Apparently, both won’t work with dynamo surfaces (apparently they work with mass surfaces?).

Is there a workaround for this?

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/4/d4922343008dc24846ce97228110384a55b1aa32.png)  
(brb in ~8 hrs)

---

<div class="post-metadata">

**Author:** ![BenjaminDoty](https://avatars.discourse-cdn.com/v4/letter/b/b19c9b/32.png) [@BenjaminDoty](https://forum.dynamobim.com/u/BenjaminDoty)\
**Post date:** [November 15, 2017, 5:04pm UTC](https://forum.dynamobim.com/t/creating-wall-from-dynamo-surfaces/16522/2 "2017-11-15T17:04:41Z")

</div>

I had the same issue. If I used the Wall.byCurveAndHeight it worked.

 ![Capture](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/0/3/03643248770de0549871c2786493c4f8785eef0e.png)

---

<div class="post-metadata">

**Author:** ![Der\_Jon](https://avatars.discourse-cdn.com/v4/letter/d/2acd7d/32.png) [@Der\_Jon](https://forum.dynamobim.com/u/Der_Jon)\
**Post date:** [November 16, 2017, 1:29am UTC](https://forum.dynamobim.com/t/creating-wall-from-dynamo-surfaces/16522/3 "2017-11-16T01:29:38Z")

</div>

Thanks, I’ll try this out.