# Creating wall finishing with room height and room boundary

**URL:** <https://forum.dynamobim.com/t/creating-wall-finishing-with-room-height-and-room-boundary/89918>\
**Category:** Revit\
**Tags:** dynamo\
**Created:** [May 23, 2023, 1:27am UTC](https://forum.dynamobim.com/t/creating-wall-finishing-with-room-height-and-room-boundary/89918 "2023-05-23T01:27:07Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [May 24, 2023, 5:36am UTC](https://forum.dynamobim.com/t/creating-wall-finishing-with-room-height-and-room-boundary/89918/21 "2023-05-24T05:36:52Z")

</div>

arhh allright its a real wall it generate

---

<div class="post-metadata">

**Author:** ![aecbcp2](https://avatars.discourse-cdn.com/v4/letter/a/b77776/32.png) [@aecbcp2](https://forum.dynamobim.com/u/aecbcp2)\
**Post date:** [May 24, 2023, 5:49am UTC](https://forum.dynamobim.com/t/creating-wall-finishing-with-room-height-and-room-boundary/89918/22 "2023-05-24T05:49:08Z")

</div>

![2023-05-24 134754](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/9/19086bcd2738f3026681e98ce1a8e95c54456927.png)  
And I can get the geometry of the wall.  
Now I am stucked on the offset node. Which node should I use to offset the geometry?  
Thank you.

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [May 24, 2023, 7:56am UTC](https://forum.dynamobim.com/t/creating-wall-finishing-with-room-height-and-room-boundary/89918/23 "2023-05-24T07:56:47Z")

</div>

Hi @aecbcp2 I dont know that node from modellical and dont use that package…but here is an quick idea with ootb and directshape, but could easy be a wall by face or wall by profile if you need a real wall element…it just a fast way and can definitly be optimized…good luck  
 ![Revit_a3F418Yi3D](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/4/b/4b2fc8fb965cc5d43e0622507a7a84264f201c69.gif)  
[Home.dyn](https://forum.dynamobim.com/uploads/short-url/8ZbY2sm0m8NFFL8fcb484eMHXOQ.dyn) (201.5 KB)

---

<div class="post-metadata">

**Author:** ![aecbcp2](https://avatars.discourse-cdn.com/v4/letter/a/b77776/32.png) [@aecbcp2](https://forum.dynamobim.com/u/aecbcp2)\
**Post date:** [May 24, 2023, 8:29am UTC](https://forum.dynamobim.com/t/creating-wall-finishing-with-room-height-and-room-boundary/89918/24 "2023-05-24T08:29:42Z")

</div>

Thank you sir it is exactly what I am looking for!!  
However I do not have the Node"Rooms by status". What is the name of this package? Thanks so much!!

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [May 24, 2023, 8:34am UTC](https://forum.dynamobim.com/t/creating-wall-finishing-with-room-height-and-room-boundary/89918/25 "2023-05-24T08:34:11Z")

</div>

Its a ootb think it first comes with 2022 if i remeber right…if you are in an older version then use "categori " and “all element of categori” but be sure you dont have unplaced rooms and not valid rooms…for filter out that in older version then try Clockwork or Datashapes roomstate nodes

[Previous page](https://forum.dynamobim.com/t/creating-wall-finishing-with-room-height-and-room-boundary/89918.md?page=1)