# Creating section views

**URL:** <https://forum.dynamobim.com/t/creating-section-views/71465>\
**Category:** Revit\
**Tags:** dynamo, views\
**Created:** [December 16, 2021, 6:25pm UTC](https://forum.dynamobim.com/t/creating-section-views/71465 "2021-12-16T18:25:49Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![hend\_gamal](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@hend\_gamal](https://forum.dynamobim.com/u/hend_gamal)\
**Post date:** [December 16, 2021, 6:25pm UTC](https://forum.dynamobim.com/t/creating-section-views/71465/1 "2021-12-16T18:25:49Z")

</div>

Hi,

I am trying to create a Dynamo Script to create Automatic Section views along a curved element (Walls), and I keep getting the error/warning message below…

What am I missing/ doing wrong?

 ![Curved Wall View Generation 00](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/6/d68a0fd5f06b93977507584f6afa00ef99625db2.png)

Regards,

 ![1Curved Wall View Generation 01](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/7/c7d1d13319c40090852c5ecf6fed0a9da673a411.png)  
 ![1Curved Wall View Generation_ error](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/6/8/68968c43f95c242482177a7b98e38a7e259c387a.png)

---

<div class="post-metadata">

**Author:** ![Andrew\_Hannell](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/andrew_hannell/32/103315_2.png) [@Andrew\_Hannell](https://forum.dynamobim.com/u/Andrew_Hannell)\
**Post date:** [December 17, 2021, 6:28am UTC](https://forum.dynamobim.com/t/creating-section-views/71465/2 "2021-12-17T06:28:59Z")

</div>

search on this forum for ‘developed section’  
(that’s what a curved section is called)

---

<div class="post-metadata">

**Author:** ![viktor\_kuzev](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/viktor_kuzev/32/48254_2.png) [@viktor\_kuzev](https://forum.dynamobim.com/u/viktor_kuzev)\
**Post date:** [December 17, 2021, 12:45pm UTC](https://forum.dynamobim.com/t/creating-section-views/71465/3 "2021-12-17T12:45:44Z")

</div>

Hi @hend_gamal  
The min and max point in the node are actually the points in the coordinate system of the section itself and not in the model coordinate system.  
They are these points basically:

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/0/c0f94bbaac1f74af8a3fdb42c922013017643365.png)

In your graph you are feeding it points that come from the model and they don’t make sense in this context

---

<div class="post-metadata">

**Author:** ![hend\_gamal](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@hend\_gamal](https://forum.dynamobim.com/u/hend_gamal)\
**Post date:** [December 26, 2021, 1:00pm UTC](https://forum.dynamobim.com/t/creating-section-views/71465/4 "2021-12-26T13:00:45Z")

</div>

Hi @Andrew_Hannell,

I am sorry for my late reply, I think you meant this post, [Creating Curved Cross Section, Bridge Engineering - Geometry - Dynamo (dynamobim.com)](https://forum.dynamobim.com/t/creating-curved-cross-section-bridge-engineering/7710), I will have a look at it.

thanks a lot

Regards,

---

<div class="post-metadata">

**Author:** ![hend\_gamal](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@hend\_gamal](https://forum.dynamobim.com/u/hend_gamal)\
**Post date:** [December 26, 2021, 1:08pm UTC](https://forum.dynamobim.com/t/creating-section-views/71465/5 "2021-12-26T13:08:54Z")

</div>

Hi @viktor_kuzev,

Although I have gone through the Dynamo Primer, I couldn’t get the concept of coordinate system (CS), minpoint, and maxpoint, but since I believe in learning by experience, I wrote the script hoping I will get those concepts.

I appreciate you clarifying what those terms means.

I will give my script another try, and post the results here.

thanks a lot

Regards,
