# Creating Revit Schedule Keys Using a Predefined Excel Sheet in Dynamo **URL:** \ **Category:** Revit\ **Tags:** revit, excel, python, dynamo\ **Created:** [April 18, 2021, 5:10pm UTC](https://forum.dynamobim.com/t/creating-revit-schedule-keys-using-a-predefined-excel-sheet-in-dynamo/63004 "2021-04-18T17:10:48Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![SeanP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/seanp/32/42560_2.png) [@SeanP](https://forum.dynamobim.com/u/SeanP)\ **Post date:** [April 18, 2021, 5:54pm UTC](https://forum.dynamobim.com/t/creating-revit-schedule-keys-using-a-predefined-excel-sheet-in-dynamo/63004/2 "2021-04-18T17:54:39Z")
I would start with searching as this has been discussed before. See if this gets you going. > [@Excel not writing information to Key Schedule](https://forum.dynamobim.com/t/excel-not-writing-information-to-key-schedule/14803): > > I am trying to fill out a Key schedule using Excel. I cannot seem to get the information from Excel to Populate in my key schedule. I have read this post [Excel to Revit Key Schedule Help](https://forum.dynamobim.com/t/excel-to-revit-key-schedule-help/1852/31). The person asking this question was told to make a new thread but i don’t think he ever did. My lists look like they generate fine in dynamo and Revit even produces the table in the key schedule if my lacing is set to shortest. The problem is that it will not fill in the text, it will sometimes fill in a box … --- _[View the full topic](https://forum.dynamobim.com/t/creating-revit-schedule-keys-using-a-predefined-excel-sheet-in-dynamo/63004)._