# Creating Interior Elevations - Fails with floors on floors

**URL:** <https://forum.dynamobim.com/t/creating-interior-elevations-fails-with-floors-on-floors/31452>\
**Category:** Revit\
**Created:** [January 30, 2019, 5:49pm UTC](https://forum.dynamobim.com/t/creating-interior-elevations-fails-with-floors-on-floors/31452 "2019-01-30T17:49:51Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![toneillC6YCH](https://avatars.discourse-cdn.com/v4/letter/t/bb73d2/32.png) [@toneillC6YCH](https://forum.dynamobim.com/u/toneillC6YCH)\
**Post date:** [January 30, 2019, 5:49pm UTC](https://forum.dynamobim.com/t/creating-interior-elevations-fails-with-floors-on-floors/31452/1 "2019-01-30T17:49:51Z")

</div>

Hi all,

I am having an issue with my interior elevations script. So it works perfectly on a model with the floor at the level line, the elevations are created to the room bounding elements. When we model floor finish on top of this slab & over the level line, it crops the elevation view to the top of this additional finish floor. Ive turned off bounding for the new floor but the same issue occurs.

I have attached the script below. Maybe theres a better way to get the bounding geometry which would negate this? Any thoughts?

Thanks[DB\_04\_InternalElevationsBySelection\_201.dyn](https://forum.dynamobim.com/uploads/short-url/dp80pCYe6wdXvVMLeq03YAlwgpE.dyn) (51.4 KB)

---

<div class="post-metadata">

**Author:** ![SeanP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/seanp/32/42560_2.png) [@SeanP](https://forum.dynamobim.com/u/SeanP)\
**Post date:** [January 30, 2019, 6:05pm UTC](https://forum.dynamobim.com/t/creating-interior-elevations-fails-with-floors-on-floors/31452/2 "2019-01-30T18:05:54Z")

</div>

Are you finish floors “room bounding”? If they are, turn that off and see if it resolves.

---

<div class="post-metadata">

**Author:** ![Marcel\_Rijsmus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/marcel_rijsmus/32/8539_2.png) [@Marcel\_Rijsmus](https://forum.dynamobim.com/u/Marcel_Rijsmus)\
**Post date:** [January 30, 2019, 6:55pm UTC](https://forum.dynamobim.com/t/creating-interior-elevations-fails-with-floors-on-floors/31452/3 "2019-01-30T18:55:00Z")

</div>

maybe you can try to catch the walls themselves and create your views like this

> **[Element View Generation in Revit with Dynamo – REVISED](https://revitbeyondbim.wordpress.com/2017/02/10/element-view-generation-in-revit-with-dynamo-revised/)**
>
> In October 2015, I wrote this post on this blog about how to automate the generation of detail (section) views of some specific Revit elements by means of a Dynamo graph. With the functionalities a…

---

<div class="post-metadata">

**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\
**Post date:** [January 31, 2019, 7:35am UTC](https://forum.dynamobim.com/t/creating-interior-elevations-fails-with-floors-on-floors/31452/4 "2019-01-31T07:35:37Z")

</div>

Try setting the limit based on the room geometry (enable room volume computations first).