# Creating architecture walls from autocad

**URL:** <https://forum.dynamobim.com/t/creating-architecture-walls-from-autocad/71849>\
**Category:** Revit\
**Tags:** revit, dynamo, bimorph, autocad\
**Created:** [December 30, 2021, 9:03pm UTC](https://forum.dynamobim.com/t/creating-architecture-walls-from-autocad/71849 "2021-12-30T21:03:36Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Marcel\_Rijsmus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/marcel_rijsmus/32/8539_2.png) [@Marcel\_Rijsmus](https://forum.dynamobim.com/u/Marcel_Rijsmus)\
**Post date:** [December 30, 2021, 10:20pm UTC](https://forum.dynamobim.com/t/creating-architecture-walls-from-autocad/71849/9 "2021-12-30T22:20:06Z")

</div>

So, you need to find out if a line in AutoCad is drawn left to right or right to left.  
That’s why center line is better  
Better still is to upload your script  
If the forum doesn’t let you, use a link to some filesharing platform.  
You can also have a look how others solved this

> [@Create walls from Cad link lines](https://forum.dynamobim.com/t/create-walls-from-cad-link-lines/25396):
>
> Hii All, I\m trying to create a walls from cad link but the issue is that i can\t convert double lines of the wall in cad into a surface to create a wall in Revit… Any help ?? I also have tried to create walls from curves but this lead to a double wall in revit as shown below

---

_[View the full topic](https://forum.dynamobim.com/t/creating-architecture-walls-from-autocad/71849)._
