# Create Surface In Revit
**URL:** https://forum.dynamobim.com/t/create-surface-in-revit/8802
**Category:** Revit
**Created:** [January 11, 2017, 11:58pm UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802 "2017-01-11T23:58:35Z")
**Posts on this page:** 10
**Page:** 1
### Author:  [@Steven](https://forum.dynamobim.com/u/Steven)
#### Post date: [January 11, 2017, 11:58pm UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802/1 "2017-01-11T23:58:35Z")
I have used Surface.ByPerimeterPoints To create some flat planes. How can I push these from Dynamo into Revit? Using Conceptual mass.
Sorry for the noob question but I cannot figure it out.
Thanks,
Steven
---
### Author:  [@Mostafa\_El\_Ayoubi](https://forum.dynamobim.com/u/Mostafa_El_Ayoubi)
#### Post date: [January 12, 2017, 12:12am UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802/2 "2017-01-12T00:12:30Z")
Hi @Steven_Hansen ,
just to make sure, you are running dynamo from a conceptual mass document?
If that’s the case, I highly recommand spring nodes package for your task. Springs.Form.ByGeometry node from that package should allow you to import clean geometry that you can work with (divide, panelize, assign material etc.).
---
### Author:  [@Steven](https://forum.dynamobim.com/u/Steven)
#### Post date: [January 12, 2017, 12:18am UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802/3 "2017-01-12T00:18:05Z")
Perfect @Mostafa_El_Ayoubi that is just what I needed
---
### Author:  [@Steven](https://forum.dynamobim.com/u/Steven)
#### Post date: [January 12, 2017, 12:19am UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802/4 "2017-01-12T00:19:18Z")
Do you know if there is a way to mirror the created surface in dynamo?
---
### Author:  [@Mostafa\_El\_Ayoubi](https://forum.dynamobim.com/u/Mostafa_El_Ayoubi)
#### Post date: [January 12, 2017, 12:22am UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802/5 "2017-01-12T00:22:37Z")
Have you tried Geometry.Mirror?
---
### Author:  [@Steven](https://forum.dynamobim.com/u/Steven)
#### Post date: [January 12, 2017, 12:33am UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802/6 "2017-01-12T00:33:43Z")
Yes but It does not seam to work.
err note: “Warning: No function called Mirror on a Revit.Elements.Element that takes Plane could be found”
---
### Author:  [@Mostafa\_El\_Ayoubi](https://forum.dynamobim.com/u/Mostafa_El_Ayoubi)
#### Post date: [January 12, 2017, 12:37am UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802/7 "2017-01-12T00:37:57Z")
The problem here is that Geometry.Mirror expects dynamo geometry as “geometry” input. Here you’re feeding it a Revit element. I suggest you mirror the geometry before you feed it to Springs.Form.ByGeometry.
---
### Author:  [@Steven](https://forum.dynamobim.com/u/Steven)
#### Post date: [January 12, 2017, 12:39am UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802/8 "2017-01-12T00:39:38Z")
wow thats simple. Thank you so much again. Huge help.
---
### Author:  [@Mostafa\_El\_Ayoubi](https://forum.dynamobim.com/u/Mostafa_El_Ayoubi)
#### Post date: [January 12, 2017, 12:41am UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802/9 "2017-01-12T00:41:43Z")
You’re welcome! 😃
---
### Author:  [@JIHWANLEE89](https://forum.dynamobim.com/u/JIHWANLEE89)
#### Post date: [January 7, 2022, 9:22am UTC](https://forum.dynamobim.com/t/create-surface-in-revit/8802/10 "2022-01-07T09:22:49Z")
Hi All,
There is a video showing how to create surfaces from elements.
[Dynamo - Generate Surfaces from Elements](https://www.youtube.com/watch?v=g9sWcjZmqy8)
I hope it is helpful!