# Create mass in place using Dynamo

**URL:** <https://forum.dynamobim.com/t/create-mass-in-place-using-dynamo/19102>\
**Category:** Revit\
**Created:** [February 15, 2018, 10:28am UTC](https://forum.dynamobim.com/t/create-mass-in-place-using-dynamo/19102 "2018-02-15T10:28:35Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![BIMadmin](https://avatars.discourse-cdn.com/v4/letter/b/958977/32.png) [@BIMadmin](https://forum.dynamobim.com/u/BIMadmin)\
**Post date:** [February 15, 2018, 10:28am UTC](https://forum.dynamobim.com/t/create-mass-in-place-using-dynamo/19102/1 "2018-02-15T10:28:36Z")

</div>

Is this possible???

---

<div class="post-metadata">

**Author:** ![Marcel\_Rijsmus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/marcel_rijsmus/32/8539_2.png) [@Marcel\_Rijsmus](https://forum.dynamobim.com/u/Marcel_Rijsmus)\
**Post date:** [February 15, 2018, 10:43am UTC](https://forum.dynamobim.com/t/create-mass-in-place-using-dynamo/19102/2 "2018-02-15T10:43:06Z")

</div>

doing the same thing you have in mind here, but in a conceptual mass family, may be the better option. In the family you have the option to make parameters.

---

<div class="post-metadata">

**Author:** ![BIMadmin](https://avatars.discourse-cdn.com/v4/letter/b/958977/32.png) [@BIMadmin](https://forum.dynamobim.com/u/BIMadmin)\
**Post date:** [February 15, 2018, 2:03pm UTC](https://forum.dynamobim.com/t/create-mass-in-place-using-dynamo/19102/3 "2018-02-15T14:03:20Z")

</div>

Thanks Marcel, but I need to have the flexibility of the in-place mass, unfurtonatelly that is not an option for us

---

<div class="post-metadata">

**Author:** ![MartinVrielink](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/martinvrielink/32/151433_2.png) [@MartinVrielink](https://forum.dynamobim.com/u/MartinVrielink)\
**Post date:** [December 8, 2022, 3:10pm UTC](https://forum.dynamobim.com/t/create-mass-in-place-using-dynamo/19102/4 "2022-12-08T15:10:15Z")

</div>

Hi Everyone,

Did you guys have an answer to this question already?  
I am looking for the same thing. Push geometry form dynamo to an in-place mass to not lose the modelling flexibility and context, like in a conceptual mass family.

Kind regards,

Martin Vrielink