# Create Layout

**URL:** <https://forum.dynamobim.com/t/create-layout/107400>\
**Category:** Civil 3D\
**Tags:** dynamo\
**Created:** [January 21, 2025, 7:41pm UTC](https://forum.dynamobim.com/t/create-layout/107400 "2025-01-21T19:41:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jbrunkhorst](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@jbrunkhorst](https://forum.dynamobim.com/u/jbrunkhorst)\
**Post date:** [January 21, 2025, 7:41pm UTC](https://forum.dynamobim.com/t/create-layout/107400/1 "2025-01-21T19:41:01Z")

</div>

I had a Layout.ByName node from the Camber add-on package that was successfully creating additional layout tabs in a drawing in Dynamo for Civil 3D 2023, but now that I have additional nodes available to me in Civil 3D 2025, is there a similar node that will create layout tabs for me? Trying to avoid having to have other team members install additional packages if possible.

---

<div class="post-metadata">

**Author:** ![jbrunkhorst](https://avatars.discourse-cdn.com/v4/letter/j/edb3f5/32.png) [@jbrunkhorst](https://forum.dynamobim.com/u/jbrunkhorst)\
**Post date:** [January 21, 2025, 10:01pm UTC](https://forum.dynamobim.com/t/create-layout/107400/2 "2025-01-21T22:01:24Z")

</div>

on a similar note, is there a way to add definition to a surface with nodes in Dynamo for Civil 3D 2025? Examples: breaklines, contours, points/point groups, etc.

I am specifically trying to get boundaries, breaklines, and point groups added into a surface.