# Create individual ceilings from pattern

**URL:** <https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013>\
**Category:** Revit\
**Tags:** dynamo\
**Created:** [November 21, 2024, 6:07am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013 "2024-11-21T06:07:51Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![rojasdanielandres](https://avatars.discourse-cdn.com/v4/letter/r/bb73d2/32.png) [@rojasdanielandres](https://forum.dynamobim.com/u/rojasdanielandres)\
**Post date:** [November 21, 2024, 6:07am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/1 "2024-11-21T06:07:51Z")

</div>

Greetings Dynamo Community. I’m facing a challenge where I need to create individual ceiling pieces out of the bigger ceiling grid.

I’ve tried to extract the pattern geometry but it’s useless since every ceiling shown in the image has a different configuration.

What I need is to extract those lines and create a ceiling in each rectangle.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/f/df0dbd123b89f28104714502676436850ba2dee3.png)

Thanks for your help

---

<div class="post-metadata">

**Author:** ![sjafarali75](https://avatars.discourse-cdn.com/v4/letter/s/c68b51/32.png) [@sjafarali75](https://forum.dynamobim.com/u/sjafarali75)\
**Post date:** [November 21, 2024, 6:27am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/2 "2024-11-21T06:27:12Z")

</div>

Hi @rojasdanielandres, can you share how much progress you’ve made?

---

<div class="post-metadata">

**Author:** ![sjafarali75](https://avatars.discourse-cdn.com/v4/letter/s/c68b51/32.png) [@sjafarali75](https://forum.dynamobim.com/u/sjafarali75)\
**Post date:** [November 21, 2024, 6:28am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/3 "2024-11-21T06:28:18Z")

</div>

try with the script below  
[Seperate Ceiling.dyn](https://forum.dynamobim.com/uploads/short-url/vdPIbz1b2f9ctA0gAGRo8nLOTxx.dyn) (22.3 KB)

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [November 21, 2024, 7:11am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/4 "2024-11-21T07:11:20Z")

</div>

Hi @rojasdanielandres and welcome…the only package i know is from sparrow where you can get the pattern lines and use them to split…or try create you own here i have a private one there use dimension reference not so fancy but it works

 ![Skærmbillede 2024-11-21 081023](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/f/bf25ff258f75112ebb34887e86a3e24bad9a5eca.png)

PS sparrow only works on straight boundery and not if curved

---

<div class="post-metadata">

**Author:** ![rojasdanielandres](https://avatars.discourse-cdn.com/v4/letter/r/bb73d2/32.png) [@rojasdanielandres](https://forum.dynamobim.com/u/rojasdanielandres)\
**Post date:** [December 3, 2024, 6:21am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/5 "2024-12-03T06:21:24Z")

</div>

I’ve tried to use this one without success. See attached the simple exercise I did. Nothing happens

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/b/ab0174e05d0ce9db9ec77695964d83b608165b59.png)

---

<div class="post-metadata">

**Author:** ![rojasdanielandres](https://avatars.discourse-cdn.com/v4/letter/r/bb73d2/32.png) [@rojasdanielandres](https://forum.dynamobim.com/u/rojasdanielandres)\
**Post date:** [December 3, 2024, 6:22am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/6 "2024-12-03T06:22:18Z")

</div>

I couldn’t make any progress yet. I’ve tried to extract the pattern but couldn’t think on any workaround for this one

---

<div class="post-metadata">

**Author:** ![solamour](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/solamour/32/153516_2.png) [@solamour](https://forum.dynamobim.com/u/solamour)\
**Post date:** [December 3, 2024, 6:41am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/7 "2024-12-03T06:41:33Z")

</div>

@rojasdanielandres this node from the Sparrow package unfortunately (pending which version of Revit you are in) may need to be updated to work. I just tested in Revit 2025 and it’s not working ☹

In Revit 2025.3 they added a new Ceiling API (Which didn’t exist prior) which now enables these nodes to be made in a better way. Can you please try download the “Rhythm” package if you are in that version?

> <https://x.com/johntpierson/status/1861861862742368286>

If you are in an older version, the options are more limited. The Sparrow package uses a workaround that is theoretically possible to recreate using Python.

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [December 3, 2024, 6:57am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/8 "2024-12-03T06:57:23Z")

</div>

Yeah so nice with the new node ,) becaurse sparrow isnt so stable, depends…so i had just tried create my own with ootb nodes and dimension lines so not full automate…but seems work in all situation…in some situation it can be fully auto with dimension reference pattern from genius loci but not if the grid is rotated i guess 😉

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [December 3, 2024, 7:19am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/9 "2024-12-03T07:19:45Z")

</div>

pS if the ceiling is not on link then feed in a null and should work in your situation i guess, but not if your boundery is curved

 ![Skærmbillede 2024-12-03 081833](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/4/f/4ff09b783823cd8bfd6e87ff460dbf3b89c35795.png)

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [December 3, 2024, 7:42am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/10 "2024-12-03T07:42:01Z")

</div>

> [@sovitek](#):
>
> can be fully auto with dimension reference pattern from genius loci but not if the grid is rotated i guess 😉

EDIT should work if rotated as well, just with the right dim style 😉

 ![Skærmbillede 2024-12-03 085100](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/d/ad39a0f2645bd2680f4ea7efa07e95ec80316bb5.png)

---

<div class="post-metadata">

**Author:** ![rojasdanielandres](https://avatars.discourse-cdn.com/v4/letter/r/bb73d2/32.png) [@rojasdanielandres](https://forum.dynamobim.com/u/rojasdanielandres)\
**Post date:** [December 3, 2024, 10:37pm UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/11 "2024-12-03T22:37:40Z")

</div>

Would you think this is possible to achieve with just the ceiling surface?

Using the lines from the grid to split the surface to get the inner polygons

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/a/0/a0869ff19267d4c81056da49d95acca6a20617aa.png)

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [December 4, 2024, 6:17am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/12 "2024-12-04T06:17:09Z")

</div>

Hi @rojasdanielandres yes use the curves for split the surface…ampersand have a great split node

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [December 4, 2024, 6:45am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/13 "2024-12-04T06:45:34Z")

</div>

![Skærmbillede 2024-12-04 074449](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/a/ea317a53ac2eb044490e891ca56a3ce74f406924.png)

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [December 25, 2024, 8:29am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/14 "2024-12-25T08:29:54Z")

</div>

someone ask me in pm… how to do it with dimension fully automated…something here should do it with the awesome genius loci package 😉 merry christmas everybody 😉 😉

 ![Skærmbillede 2024-12-24 110124](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/e/1ed5b001b9fd4e1fcfe2298fc7af89b9af34f0f1.png)

---

<div class="post-metadata">

**Author:** ![Alien](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/alien/32/40701_2.png) [@Alien](https://forum.dynamobim.com/u/Alien)\
**Post date:** [December 25, 2024, 11:49am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/15 "2024-12-25T11:49:24Z")

</div>

I have no idea what I’m doing on this forum on Christmas day… but… Merry Christmas to you and everyone too. 🎅

---

<div class="post-metadata">

**Author:** ![sovitek](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/sovitek/32/116237_2.png) [@sovitek](https://forum.dynamobim.com/u/sovitek)\
**Post date:** [December 25, 2024, 11:51am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/16 "2024-12-25T11:51:14Z")

</div>

yeah it was yesterday here 😉 but merry xmas to you Alien as well 😉

---

<div class="post-metadata">

**Author:** ![Alien](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/alien/32/40701_2.png) [@Alien](https://forum.dynamobim.com/u/Alien)\
**Post date:** [December 25, 2024, 11:56am UTC](https://forum.dynamobim.com/t/create-individual-ceilings-from-pattern/106013/17 "2024-12-25T11:56:55Z")

</div>

Well merry Christmas for yesterday then 😃
