# Create curtain wall grid lines from lines

**URL:** <https://forum.dynamobim.com/t/create-curtain-wall-grid-lines-from-lines/32749>\
**Category:** Uncategorized\
**Created:** [February 28, 2019, 5:56am UTC](https://forum.dynamobim.com/t/create-curtain-wall-grid-lines-from-lines/32749 "2019-02-28T05:56:44Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![george](https://avatars.discourse-cdn.com/v4/letter/g/71e660/32.png) [@george](https://forum.dynamobim.com/u/george)\
**Post date:** [February 28, 2019, 7:16am UTC](https://forum.dynamobim.com/t/create-curtain-wall-grid-lines-from-lines/32749/3 "2019-02-28T07:16:20Z")

</div>

Hi @jacob.small, thank you once again for the reply.  
Maybe I said it in a wrong way: by angled I meant rotated in the curtain wall plane.  
I said this because I found out that there are some Dynamo components which can generate the curtain wall grid, but only of orthogonal mullions. Like [“Create Custom Grids”](https://forum.dynamobim.com/t/create-curtain-wall-grids-for-mullions/4953/2?u=george) from “ReAnimation” package.  
In my case I would have diagonal mullions as well:  
 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/6/e/6e5d8f5a5c48778908b2ba9bb5b0856268100a64.png)  
And I couldn’t find Dynamo component which is capable of doing this.

---

_[View the full topic](https://forum.dynamobim.com/t/create-curtain-wall-grid-lines-from-lines/32749)._