# Create Areas

**URL:** <https://forum.dynamobim.com/t/create-areas/9919>\
**Category:** Revit\
**Tags:** revit\
**Created:** [February 27, 2017, 5:13am UTC](https://forum.dynamobim.com/t/create-areas/9919 "2017-02-27T05:13:16Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fernando\_Maytorena\_E](https://avatars.discourse-cdn.com/v4/letter/f/8797f3/32.png) [@Fernando\_Maytorena\_E](https://forum.dynamobim.com/u/Fernando_Maytorena_E)\
**Post date:** [February 27, 2017, 5:13am UTC](https://forum.dynamobim.com/t/create-areas/9919/1 "2017-02-27T05:13:16Z")

</div>

Hi everyone,

I want to automate the complete workflow for creating area plans from Dynamo.

With help from some of you, I was able to create the area plan views, and the area boundaries from within Dynamo. Now, I’m wondering if it is possible to create areas within those area boundaries I just managed to create. Any ideas?

Regards,

---

<div class="post-metadata">

**Author:** ![Yna\_Db](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/yna_db/32/30641_2.png) [@Yna\_Db](https://forum.dynamobim.com/u/Yna_Db)\
**Post date:** [February 27, 2017, 7:36am UTC](https://forum.dynamobim.com/t/create-areas/9919/2 "2017-02-27T07:36:54Z")

</div>

Hi, could you please share what you found so far in order to make the issue fully understandable? Thanks 🙂

---

<div class="post-metadata">

**Author:** ![Fernando\_Maytorena\_E](https://avatars.discourse-cdn.com/v4/letter/f/8797f3/32.png) [@Fernando\_Maytorena\_E](https://forum.dynamobim.com/u/Fernando_Maytorena_E)\
**Post date:** [February 27, 2017, 8:20pm UTC](https://forum.dynamobim.com/t/create-areas/9919/3 "2017-02-27T20:20:10Z")

</div>

Hi Yna, Sure, I’m posting some screenshots to further explain.

This is the complete definition.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/0/703fb0f7d3545e73e4ed5919c5457a0df5fb712e.png)

First, I use the Rhynamo package to retrieve the curves from the conceptual design which were made in a Rhino model, this are arranged according to the Rhino layers. I proceed to transform them into a Dynamo PolyCurve.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/8/c8455aac5e4a17d3de221a2e88e6d0355d9c981e.png)  
 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/d/7dbbfb24321745922e46fa6d597fbbd417858496.jpg)

Then, I join all of the PolyCurves into one list, in order to remap them to different lists according to the elevation of the Revit Levels.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/e/1e8c59f3cca8a6bf899841a2825c19fa8675b38c.png)

Once organized on lists by levels, I used the AreaSeparator.FromCurve to create Area Boundaries according to these Dynamo PolyCurves in the specified Area Plan.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/8/d8ac0e9873cd2d1605be1ec06f306cc4156dd810.png)  
 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/8/f/8fbdce39ab2abd7b3ef7a6b487d0f8d79a14c128.png)

Now, what I would like to do is, create the Areas corresponding to these Area Boundaries I just created. I’m attaching a reference image of what I would to achieve with Dynamo (the areas on the image below I had to placed them manually).

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/0/6/067dfed39b6c161a633fea4ee6e1be23141c3d4b.png)

Any ideas how I could accomplish this?

Regards,

---

<div class="post-metadata">

**Author:** ![Yna\_Db](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/yna_db/32/30641_2.png) [@Yna\_Db](https://forum.dynamobim.com/u/Yna_Db)\
**Post date:** [February 27, 2017, 9:20pm UTC](https://forum.dynamobim.com/t/create-areas/9919/4 "2017-02-27T21:20:31Z")

</div>

You could use _Steam Nodes_ package to create areas, but you will probably need to group your curves first into sublists…

---

<div class="post-metadata">

**Author:** ![Fernando\_Maytorena\_E](https://avatars.discourse-cdn.com/v4/letter/f/8797f3/32.png) [@Fernando\_Maytorena\_E](https://forum.dynamobim.com/u/Fernando_Maytorena_E)\
**Post date:** [February 28, 2017, 2:35am UTC](https://forum.dynamobim.com/t/create-areas/9919/5 "2017-02-28T02:35:37Z")

</div>

Excellent, I didn’t know that package. I didn’t have to regroup the curves as such, as I had them as PolyCurves, so I just connected those to the _Area.CreateAtPoint_ node from _SteamNodes_, as well as the respecting Area Plan and that worked perfectly.

Cheers!

---

<div class="post-metadata">

**Author:** ![Astrid](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/astrid/32/90012_2.png) [@Astrid](https://forum.dynamobim.com/u/Astrid)\
**Post date:** [February 20, 2020, 8:49am UTC](https://forum.dynamobim.com/t/create-areas/9919/6 "2020-02-20T08:49:49Z")

</div>

Hi All,

This node no longer works in Dynamo 2.3 and Revit 2020 - are any alternatives out there?

---

<div class="post-metadata">

**Author:** ![CVestesen](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/cvestesen/32/56704_2.png) [@CVestesen](https://forum.dynamobim.com/u/CVestesen)\
**Post date:** [February 20, 2020, 12:23pm UTC](https://forum.dynamobim.com/t/create-areas/9919/7 "2020-02-20T12:23:12Z")

</div>

Hi Astrid,

Can you post it in new thread?

And upload a picture of your Dynamo work so far 🙂

---

<div class="post-metadata">

**Author:** ![Astrid](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/astrid/32/90012_2.png) [@Astrid](https://forum.dynamobim.com/u/Astrid)\
**Post date:** [February 20, 2020, 12:25pm UTC](https://forum.dynamobim.com/t/create-areas/9919/8 "2020-02-20T12:25:41Z")

</div>

Hi, I made a new project and opened the script in Revit 2019 and Dynamo 2.0 and this node works fine there.
