# Convert typical details from autocad to drafting view revit

**URL:** <https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274>\
**Category:** Revit\
**Tags:** revit, dynamo\
**Created:** [September 20, 2022, 9:11pm UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274 "2022-09-20T21:11:14Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![nathanwalk](https://avatars.discourse-cdn.com/v4/letter/n/c77e96/32.png) [@nathanwalk](https://forum.dynamobim.com/u/nathanwalk)\
**Post date:** [September 20, 2022, 9:11pm UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/1 "2022-09-20T21:11:14Z")

</div>

Have linked all my details in to drafting in Revit already just want to pick all the lines to create detail lines

Using the layer and co-ordinates XYZ etc for autocad

Cheers guys

---

<div class="post-metadata">

**Author:** ![GavinNicholls](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/gavinnicholls/32/190442_2.png) [@GavinNicholls](https://forum.dynamobim.com/u/GavinNicholls)\
**Post date:** [September 20, 2022, 9:43pm UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/2 "2022-09-20T21:43:17Z")

</div>

That’s a big ‘just’.

Look into Bimorph Nodes as a starting point which can read CAD lines by layer name from a CAD object. You can then make detail curves from these using dynamo.

Go attempt a script and share your issues from there to get more help from the forums.

---

<div class="post-metadata">

**Author:** ![nathanwalk](https://avatars.discourse-cdn.com/v4/letter/n/c77e96/32.png) [@nathanwalk](https://forum.dynamobim.com/u/nathanwalk)\
**Post date:** [September 20, 2022, 10:34pm UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/3 "2022-09-20T22:34:42Z")

</div>

have’nt had much success with bimorph

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/b/3bb3e55271586dbadb8e7fcbaaf2210280d07ee4.png)

have the curve and layer key info coming through

but as soon as i try to use the create model curves I get an error

---

<div class="post-metadata">

**Author:** ![nathanwalk](https://avatars.discourse-cdn.com/v4/letter/n/c77e96/32.png) [@nathanwalk](https://forum.dynamobim.com/u/nathanwalk)\
**Post date:** [September 20, 2022, 10:39pm UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/4 "2022-09-20T22:39:14Z")

</div>

![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/7/b735c19cc1540eb3f211e9a8d682d960b8288796.png)

when boolean is set to true  
get null for everthing

---

<div class="post-metadata">

**Author:** ![GavinNicholls](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/gavinnicholls/32/190442_2.png) [@GavinNicholls](https://forum.dynamobim.com/u/GavinNicholls)\
**Post date:** [September 20, 2022, 10:49pm UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/5 "2022-09-20T22:49:59Z")

</div>

Model curves aren’t valid in drafting views, set that to false and use the OOTB node to create detail curves afterwards instead.

---

<div class="post-metadata">

**Author:** ![claudia\_kopietz](https://avatars.discourse-cdn.com/v4/letter/c/85e7bf/32.png) [@claudia\_kopietz](https://forum.dynamobim.com/u/claudia_kopietz)\
**Post date:** [June 30, 2023, 2:39pm UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/6 "2023-06-30T14:39:59Z")

</div>

Hi there,

I’m quite new to dynamo. did someone figure out this script? could that be shared here?

many thanks,  
Claudia

---

<div class="post-metadata">

**Author:** ![staylor](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/staylor/32/94307_2.png) [@staylor](https://forum.dynamobim.com/u/staylor)\
**Post date:** [June 30, 2023, 2:56pm UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/7 "2023-06-30T14:56:51Z")

</div>

Are you looking to start from scratch and create a drafting view from a dwg or have you gotten to the point of the issue that nathan was having and can’t get past that?

---

<div class="post-metadata">

**Author:** ![claudia\_kopietz](https://avatars.discourse-cdn.com/v4/letter/c/85e7bf/32.png) [@claudia\_kopietz](https://forum.dynamobim.com/u/claudia_kopietz)\
**Post date:** [July 7, 2023, 9:10am UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/8 "2023-07-07T09:10:29Z")

</div>

Hello,

I got to the same point as Nathan and couldn’t fix it. After reviewing with a colleague, we got sorted 🙂  
Thanks

---

<div class="post-metadata">

**Author:** ![nathanwalk](https://avatars.discourse-cdn.com/v4/letter/n/c77e96/32.png) [@nathanwalk](https://forum.dynamobim.com/u/nathanwalk)\
**Post date:** [July 7, 2023, 10:30am UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/9 "2023-07-07T10:30:39Z")

</div>

Can you share? kinda went off the project for abit.

---

<div class="post-metadata">

**Author:** ![rathriftshopp](https://avatars.discourse-cdn.com/v4/letter/r/e5b9ba/32.png) [@rathriftshopp](https://forum.dynamobim.com/u/rathriftshopp)\
**Post date:** [September 7, 2025, 10:08am UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/10 "2025-09-07T10:08:11Z")

</div>

Have you solved the problem? I haven’t solved it yet. Can you give me a screenshot of the script?

---

<div class="post-metadata">

**Author:** ![Andriy](https://avatars.discourse-cdn.com/v4/letter/a/8edcca/32.png) [@Andriy](https://forum.dynamobim.com/u/Andriy)\
**Post date:** [September 8, 2025, 1:31pm UTC](https://forum.dynamobim.com/t/convert-typical-details-from-autocad-to-drafting-view-revit/81274/11 "2025-09-08T13:31:35Z")

</div>

This way works on my side, pretty straightforward

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/0/8/083e51473fc8a464f3abc98f101d28610af1ee93.png)
