# Convert CAD Lines to revit wall, using lines intersections (don't have polylines)

**URL:** <https://forum.dynamobim.com/t/convert-cad-lines-to-revit-wall-using-lines-intersections-dont-have-polylines/24937>\
**Category:** Geometry\
**Tags:** revit, dynamo, bimorph\
**Created:** [August 17, 2018, 1:25pm UTC](https://forum.dynamobim.com/t/convert-cad-lines-to-revit-wall-using-lines-intersections-dont-have-polylines/24937 "2018-08-17T13:25:39Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![NICNAC](https://avatars.discourse-cdn.com/v4/letter/n/3ec8ea/32.png) [@NICNAC](https://forum.dynamobim.com/u/NICNAC)\
**Post date:** [July 1, 2019, 1:06pm UTC](https://forum.dynamobim.com/t/convert-cad-lines-to-revit-wall-using-lines-intersections-dont-have-polylines/24937/3 "2019-07-01T13:06:54Z")

</div>

Hi, if you haven’t found it jet, try this link.

> [@Create walls from Cad link lines](https://forum.dynamobim.com/t/create-walls-from-cad-link-lines/25396):
>
> Hii All, I\m trying to create a walls from cad link but the issue is that i can\t convert double lines of the wall in cad into a surface to create a wall in Revit… Any help ?? I also have tried to create walls from curves but this lead to a double wall in revit as shown below

---

_[View the full topic](https://forum.dynamobim.com/t/convert-cad-lines-to-revit-wall-using-lines-intersections-dont-have-polylines/24937)._
