# Clockwork Floor.SlabShapeByPoints isn't taking in multiple floors

**URL:** <https://forum.dynamobim.com/t/clockwork-floor-slabshapebypoints-isnt-taking-in-multiple-floors/4297>\
**Category:** Revit\
**Tags:** clockwork\
**Created:** [June 2, 2016, 3:31pm UTC](https://forum.dynamobim.com/t/clockwork-floor-slabshapebypoints-isnt-taking-in-multiple-floors/4297 "2016-06-02T15:31:02Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Danny\_Bentley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/danny_bentley/32/52927_2.png) [@Danny\_Bentley](https://forum.dynamobim.com/u/Danny_Bentley)\
**Post date:** [June 2, 2016, 3:31pm UTC](https://forum.dynamobim.com/t/clockwork-floor-slabshapebypoints-isnt-taking-in-multiple-floors/4297/1 "2016-06-02T15:31:02Z")

</div>

Hello Dynamo Community,

The node “Floor.SlabShapeByPoints” has an input for an array of floors, however, when I send in more then one slab which aligns with my points it will not deform them. If I send them in one at a time it works. Has anyone had any luck sending in more then one slab? Below is my simple set up should I have a loop or something to iterate through the list to send them in.

Thank you.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/d/d7784bfc951df658c78fea67b46bb3c03072bf2e.JPG)

---

<div class="post-metadata">

**Author:** ![john\_pierson](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/john_pierson/32/191977_2.png) [@john\_pierson](https://forum.dynamobim.com/u/john_pierson)\
**Post date:** [June 2, 2016, 4:03pm UTC](https://forum.dynamobim.com/t/clockwork-floor-slabshapebypoints-isnt-taking-in-multiple-floors/4297/2 "2016-06-02T16:03:33Z")

</div>

You might try setting lacing to longest on the node.

---

<div class="post-metadata">

**Author:** ![Danny\_Bentley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/danny_bentley/32/52927_2.png) [@Danny\_Bentley](https://forum.dynamobim.com/u/Danny_Bentley)\
**Post date:** [June 2, 2016, 4:38pm UTC](https://forum.dynamobim.com/t/clockwork-floor-slabshapebypoints-isnt-taking-in-multiple-floors/4297/3 "2016-06-02T16:38:23Z")

</div>

I thought that might have worked but it didn’t.

---

<div class="post-metadata">

**Author:** ![Thomas\_Mahon](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/thomas_mahon/32/64209_2.png) [@Thomas\_Mahon](https://forum.dynamobim.com/u/Thomas_Mahon)\
**Post date:** [June 2, 2016, 7:03pm UTC](https://forum.dynamobim.com/t/clockwork-floor-slabshapebypoints-isnt-taking-in-multiple-floors/4297/4 "2016-06-02T19:03:54Z")

</div>

Typically the cause of the failure is the order of the objects - in your case slabs. Ive not tested the node you’re using but certainly the case for creating shafts which is why I’d suggest checking. Order them by their elevation and see if that works

---

<div class="post-metadata">

**Author:** ![Danny\_Bentley](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/danny_bentley/32/52927_2.png) [@Danny\_Bentley](https://forum.dynamobim.com/u/Danny_Bentley)\
**Post date:** [June 2, 2016, 8:53pm UTC](https://forum.dynamobim.com/t/clockwork-floor-slabshapebypoints-isnt-taking-in-multiple-floors/4297/5 "2016-06-02T20:53:09Z")

</div>

Thank you Thomas and John. I will try to organize my points, slab and lace long. I think this my work.