# Civil 3D - Mtext location as a point in Dynamo

**URL:** <https://forum.dynamobim.com/t/civil-3d-mtext-location-as-a-point-in-dynamo/73682>\
**Category:** Civil 3D\
**Created:** [February 24, 2022, 6:20pm UTC](https://forum.dynamobim.com/t/civil-3d-mtext-location-as-a-point-in-dynamo/73682 "2022-02-24T18:20:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![AymanAl-Maaraf](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/aymanal-maaraf/32/132667_2.png) [@AymanAl-Maaraf](https://forum.dynamobim.com/u/AymanAl-Maaraf)\
**Post date:** [February 24, 2022, 6:20pm UTC](https://forum.dynamobim.com/t/civil-3d-mtext-location-as-a-point-in-dynamo/73682/1 "2022-02-24T18:20:18Z")

</div>

How can I get the position of all the Mtext from a Civil 3D file inside Dynamo as a list of points?  
Thanks

---

<div class="post-metadata">

**Author:** ![hosneyalaa](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/hosneyalaa/32/100865_2.png) [@hosneyalaa](https://forum.dynamobim.com/u/hosneyalaa)\
**Post date:** [February 24, 2022, 6:43pm UTC](https://forum.dynamobim.com/t/civil-3d-mtext-location-as-a-point-in-dynamo/73682/2 "2022-02-24T18:43:21Z")

</div>

Hi  
See this

> [@Set Mtext Base Point](https://forum.dynamobim.com/t/set-mtext-base-point/72764/3):
>
> Here you go @simon022. Give this a try. [SetMTextBasePoint.dyn](https://forum.dynamobim.com/uploads/short-url/cez10w0ZjUh5LzXUvJJ6qrPcn47.dyn) (137.8 KB)

---

<div class="post-metadata">

**Author:** ![AymanAl-Maaraf](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/aymanal-maaraf/32/132667_2.png) [@AymanAl-Maaraf](https://forum.dynamobim.com/u/AymanAl-Maaraf)\
**Post date:** [February 24, 2022, 6:53pm UTC](https://forum.dynamobim.com/t/civil-3d-mtext-location-as-a-point-in-dynamo/73682/3 "2022-02-24T18:53:06Z")

</div>

Thanks a lot, all I needed is to know about this node ObjectExtensions.GetParameterByName!