# Civil 3D Label Arrangement – Script or Manual Process?

**URL:** <https://forum.dynamobim.com/t/civil-3d-label-arrangement-script-or-manual-process/114962>\
**Category:** Civil 3D\
**Tags:** python\
**Created:** [July 21, 2026, 7:27am UTC](https://forum.dynamobim.com/t/civil-3d-label-arrangement-script-or-manual-process/114962 "2026-07-21T07:27:49Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![ISECnico](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/isecnico/32/198892_2.png) [@ISECnico](https://forum.dynamobim.com/u/ISECnico)\
**Post date:** [July 22, 2026, 1:52am UTC](https://forum.dynamobim.com/t/civil-3d-label-arrangement-script-or-manual-process/114962/3 "2026-07-22T01:52:28Z")

</div>

> From the Guidelines: [Please spend some time browsing the topics here before replying or starting your own, and you’ll have a better chance of meeting others who share your interests.](https://forum.dynamobim.com/guidelines#improve)

1. First, search the forum with “label arrangement” to see if there are similar threads that you can reference. Here are a few topics that might be relevant to your question.

> [@How to provide offset for the text to placed along the alignment without overlapping](https://forum.dynamobim.com/t/how-to-provide-offset-for-the-text-to-placed-along-the-alignment-without-overlapping/101448/7):
>
> Basically, you need to figure out an algorithm to find the right direct for each label. Depending on elements, you can try to use normal vector or a tangent formula. At the end, I would use Geometry.Translate(distance, direction) node for the insertionPoint input to set the new location of my label.

> [@Use Dynamo To Automatically Adjust Labels for Plan Readability](https://forum.dynamobim.com/t/use-dynamo-to-automatically-adjust-labels-for-plan-readability/83711/3):
>
> I understand your point. Thanks for the good explanation. Would it be difficult to go just a slight step further than doing the automatic labeling and have the label locations set so that they at least don’t overlap with each other? Scale would have to be taken into account, but being able to start from a position where the labels themselves don’t overlap could be a nice starting point unless that is not worth the development time. The situation I am thinking of where this would be most effecti…

[Optimizing Room Tag Placement with Generative Design, DynaShape and VASA](https://dynamobim.org/optimizing-room-tag-placement-with-generative-design-dynashape-and-vasa/)

1. Try to create a graph (.dyn) that implements the label arrangement.
2. When you need assistance, ask the community for help or suggestions, share your graph and explain the context.

These are the basic steps to getting good support from the forum.

---

_[View the full topic](https://forum.dynamobim.com/t/civil-3d-label-arrangement-script-or-manual-process/114962)._
