# Changing Civil 3d Structure Part details

**URL:** <https://forum.dynamobim.com/t/changing-civil-3d-structure-part-details/67400>\
**Category:** Civil 3D\
**Created:** [August 21, 2021, 11:52pm UTC](https://forum.dynamobim.com/t/changing-civil-3d-structure-part-details/67400 "2021-08-21T23:52:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![darren.stewart7XBTH](https://avatars.discourse-cdn.com/v4/letter/d/3ab097/32.png) [@darren.stewart7XBTH](https://forum.dynamobim.com/u/darren.stewart7XBTH)\
**Post date:** [August 21, 2021, 11:52pm UTC](https://forum.dynamobim.com/t/changing-civil-3d-structure-part-details/67400/1 "2021-08-21T23:52:44Z")

</div>

Hi,

I want to use dynamo to change the part parameters of selected structures. Specifically i want to change the cover parameter to reflect the position of the manhole.

I have been able to create the following simple dynamo

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/c/1cad58094f5d1181d49d652f1e279daafdee8565.jpeg)

The problem is that Part.SetPartDataValuebyName doesn’t actually give me access to the cover parameter. I can change Mat … which i have creatively done as a test - but the cover parameter which is also attached to the structure cant be accessed …

is there a solution ?

---

<div class="post-metadata">

**Author:** ![KirkWM](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kirkwm/32/104406_2.png) [@KirkWM](https://forum.dynamobim.com/u/KirkWM)\
**Post date:** [August 23, 2021, 4:42pm UTC](https://forum.dynamobim.com/t/changing-civil-3d-structure-part-details/67400/2 "2021-08-23T16:42:35Z")

</div>

Use “SC” instead of “Cover” for the part parameter name (likely structure cover). Welcome to the community!

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/d/7/d7ae1efcbb7969171f4964ec3c52ec55533e7354.png)
