# Change Family parameter to shared parameter

**URL:** <https://forum.dynamobim.com/t/change-family-parameter-to-shared-parameter/9292>\
**Category:** Revit\
**Created:** [February 1, 2017, 12:57pm UTC](https://forum.dynamobim.com/t/change-family-parameter-to-shared-parameter/9292 "2017-02-01T12:57:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Palle\_Bisgaard](https://avatars.discourse-cdn.com/v4/letter/p/f9ae1b/32.png) [@Palle\_Bisgaard](https://forum.dynamobim.com/u/Palle_Bisgaard)\
**Post date:** [February 1, 2017, 12:57pm UTC](https://forum.dynamobim.com/t/change-family-parameter-to-shared-parameter/9292/1 "2017-02-01T12:57:57Z")

</div>

Hi all of you  
Any good advice on how to change a family parameter to a shared parameter?  
I have a list of family parameters in my family, that is supposed to be shared parameters.  
I already got to a point where I have created the parameters as shared parameters in my shared parameterfile. Now I just need to change the original familyparameter to shared parameters, with the same naming.  
I am very open to good advices.  
Best regards and thanks in advanced.  
Palle Bisgaard

---

<div class="post-metadata">

**Author:** ![thiru2jack](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/thiru2jack/32/112308_2.png) [@thiru2jack](https://forum.dynamobim.com/u/thiru2jack)\
**Post date:** [September 7, 2018, 9:07am UTC](https://forum.dynamobim.com/t/change-family-parameter-to-shared-parameter/9292/2 "2018-09-07T09:07:28Z")

</div>

Export your parameters from family