# Change Duct Loss Coefficient to Another Fitting in ASHRAE Table

**URL:** <https://forum.dynamobim.com/t/change-duct-loss-coefficient-to-another-fitting-in-ashrae-table/17874>\
**Category:** Uncategorized\
**Created:** [January 4, 2018, 11:05pm UTC](https://forum.dynamobim.com/t/change-duct-loss-coefficient-to-another-fitting-in-ashrae-table/17874 "2018-01-04T23:05:54Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![nathaniel.g.macdonal](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/nathaniel.g.macdonal/32/29299_2.png) [@nathaniel.g.macdonal](https://forum.dynamobim.com/u/nathaniel.g.macdonal)\
**Post date:** [January 8, 2018, 3:37pm UTC](https://forum.dynamobim.com/t/change-duct-loss-coefficient-to-another-fitting-in-ashrae-table/17874/5 "2018-01-08T15:37:26Z")

</div>

Thanks @Jonathan_Roy. I had actually done that already after reading through your post more thoroughly. Although I can snoop to see the Loss Method parameter, the Loss Method Settings parameter ends up relatively blank with this.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/4/e47d2ce6651b13e4696a766800a8246ea2324100.png)

So I can’t find a unique parameter value for the type of fitting. Therefore I’m guessing its a little more complicated with something in python.

---

_[View the full topic](https://forum.dynamobim.com/t/change-duct-loss-coefficient-to-another-fitting-in-ashrae-table/17874)._
