# Center Point of Wall Openings **URL:** \ **Category:** Packages\ **Created:** [April 1, 2016, 3:03pm UTC](https://forum.dynamobim.com/t/center-point-of-wall-openings/3607 "2016-04-01T15:03:01Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Dennis\_Goff](https://avatars.discourse-cdn.com/v4/letter/d/51bf81/32.png) [@Dennis\_Goff](https://forum.dynamobim.com/u/Dennis_Goff)\ **Post date:** [April 1, 2016, 3:03pm UTC](https://forum.dynamobim.com/t/center-point-of-wall-openings/3607/1 "2016-04-01T15:03:01Z")
I have a whole series of wall openings (not windows) in this project. What I need to do is be able to pick one, and extract the XYZ coordinates of its center point And hopefully then bake it into revit, so that I can dimension off of it. There doesn’t seem to be much in the way of nodes for Openings in dynamo, but I really need to get this information. Any help would be much appreciated!   Thanks! ---
**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\ **Post date:** [April 2, 2016, 1:39am UTC](https://forum.dynamobim.com/t/center-point-of-wall-openings/3607/2 "2016-04-02T01:39:38Z")
Hi Dennis, Please note that below is an example of straight walls only. Good Luck! ![Untitled](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/f/f61e2b5a6c2d1f980a50634dd33ac4e19f2a3ac1.png) ---
**Author:** ![Dennis\_Goff](https://avatars.discourse-cdn.com/v4/letter/d/51bf81/32.png) [@Dennis\_Goff](https://forum.dynamobim.com/u/Dennis_Goff)\ **Post date:** [April 4, 2016, 8:10am UTC](https://forum.dynamobim.com/t/center-point-of-wall-openings/3607/3 "2016-04-04T08:10:42Z")
KULKUL, Thanks! I eventually arrived at pretty much the same solution! Didn’t even think about curved walls, but good thing there aren’t any in this project!