# Camber Feedback Thread

**URL:** <https://forum.dynamobim.com/t/camber-feedback-thread/68942>\
**Category:** Civil 3D\
**Created:** [October 6, 2021, 7:12am UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942 "2021-10-06T07:12:22Z")\
**Posts on this page:** 20\
**Page:** 20

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 21, 2023, 11:30pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/384 "2023-03-21T23:30:22Z")

</div>

> [@patrick.ericson](#):
>
> I know that you are busy but maybe you can put it in your backlog.

Sure! Adding to the backlog is the easy part 😉

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 21, 2023, 11:30pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/385 "2023-03-21T23:30:52Z")

</div>

> [@Drbohlav](#):
>
> is it possible with Camber to add sample section sources from TIN surfaces to section views? Is it posible to project objects (cogo points) to multiple section views?

No, not at this time.

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 21, 2023, 11:32pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/386 "2023-03-21T23:32:10Z")

</div>

> [@elliotgr2010](#):
>
> It looks like the CodeSetStyle.RemoveItem node only works with point codes.

Thanks @elliotgr2010, I’ll look into it further when I have time.

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 21, 2023, 11:33pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/387 "2023-03-21T23:33:54Z")

</div>

> [@aravind.akhil007](#):
>
> I am facing an error for the _Profile View Style_ node, which shows “Dereferencing a non-pointer”.

Tough to say without more info. If you share the DWG I can try to take a look.

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 23, 2023, 2:09pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/388 "2023-03-23T14:09:01Z")

</div>

Split this topic on March 23, 2023, 2:09pm UTC

4 posts were split to a new topic: [Creating fields in MText](https://forum.dynamobim.com/t/creating-fields-in-mtext/87740)

---

<div class="post-metadata">

**Author:** ![craigp](https://avatars.discourse-cdn.com/v4/letter/c/ce73a5/32.png) [@craigp](https://forum.dynamobim.com/u/craigp)\
**Post date:** [March 23, 2023, 5:41am UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/390 "2023-03-23T05:41:09Z")

</div>

Hi Zachri,

Do you have any nodes to Extract Part(pipe) Geometry of Profile Views?

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 23, 2023, 2:07pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/392 "2023-03-23T14:07:49Z")

</div>

Split this topic on March 23, 2023, 2:07pm UTC

A post was split to a new topic: [Remove existing DEM and add new](https://forum.dynamobim.com/t/remove-existing-dem-and-add-new/87739)

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 23, 2023, 2:09pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/393 "2023-03-23T14:09:27Z")

</div>

Not at this time.

---

<div class="post-metadata">

**Author:** ![craigp](https://avatars.discourse-cdn.com/v4/letter/c/ce73a5/32.png) [@craigp](https://forum.dynamobim.com/u/craigp)\
**Post date:** [March 23, 2023, 3:29pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/394 "2023-03-23T15:29:24Z")

</div>

Possible to add Pipe Network Parts and Pressure Network Parts on profile view in your package? I found this for pressure parts:

[https://help.autodesk.com/view/CIV3D/2023/ENU/?guid=8cd967f8-ec32-d496-827e-9ea8c8880ff8](https://help.autodesk.com/view/CIV3D/2023/ENU/?guid=8cd967f8-ec32-d496-827e-9ea8c8880ff8)

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 24, 2023, 1:52am UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/395 "2023-03-24T01:52:15Z")

</div>

Split this topic on March 24, 2023, 1:52am UTC

A post was merged into an existing topic: [Remove existing DEM and add new](https://forum.dynamobim.com/t/remove-existing-dem-and-add-new/87739/2)

---

<div class="post-metadata">

**Author:** ![Ken.HoGXTTP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/ken.hogxttp/32/166484_2.png) [@Ken.HoGXTTP](https://forum.dynamobim.com/u/Ken.HoGXTTP)\
**Post date:** [March 27, 2023, 3:39am UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/397 "2023-03-27T03:39:48Z")

</div>

I would like to ask if your installation package has a node that can extract the actual path of Xref, because one of my changes is to write the actual path of Xref that already exists in the drawing into the EXCEL table. I don’t know if your installation package node has this function.

 ![Screenshot 2023-03-27 111011](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/5/b/5b78988988e9c5b029c101175f6bebcc8dc8d2b8.jpeg)

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 27, 2023, 4:03am UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/398 "2023-03-27T04:03:22Z")

</div>

Hi @Ken.HoGXTTP,

The short answer is no, not at the moment. There was a similar question earlier:

> [@Camber Feedback Thread](https://forum.dynamobim.com/t/camber-feedback-thread/68942/362):
>
> Hi @zachri.jensen I want to show you the tricky part when applying your ExternalDocument.LoadFromFile node. In a nutshell, the point is that if you feed this node with a relative path of a file, the node returns null. It looks to me like an elegant solution to add to your package an additional node (FoundAt) which would return an absolute file path. I’ve attached all the source files below. [test\_ExternalDocument.LoadFromFile.dyn](https://forum.dynamobim.com/uploads/short-url/mbovGYf50PTqjGzx8iFiCqudE8y.dyn) …

And I haven’t had time to look into it further.

> [@Camber Feedback Thread](https://forum.dynamobim.com/t/camber-feedback-thread/68942/377):
>
> It isn’t quite that simple, but I can add it to the to-do list for when I have some free time to make updates.

---

<div class="post-metadata">

**Author:** ![Ken.HoGXTTP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/ken.hogxttp/32/166484_2.png) [@Ken.HoGXTTP](https://forum.dynamobim.com/u/Ken.HoGXTTP)\
**Post date:** [March 27, 2023, 6:00am UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/400 "2023-03-27T06:00:53Z")

</div>

Thank you for your reply. 😀Yes, I have the same problem as him. I also want to call that node to solve the problem. Unfortunately, the drawings of our drawing colleagues usually have hundreds of Xrefs. This FOUND AT node is really good It helped me. I hope you can post an announcement as soon as you update 🤣

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 28, 2023, 4:25am UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/401 "2023-03-28T04:25:08Z")

</div>

FYI @ana.ortizMPU5K

> [@I want to ask dynamo if there is any node that can extract the actual path of Xref](https://forum.dynamobim.com/t/i-want-to-ask-dynamo-if-there-is-any-node-that-can-extract-the-actual-path-of-xref/87850/14):
>
> This node is available in Camber v4.2.5

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [March 31, 2023, 10:21pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/402 "2023-03-31T22:21:46Z")

</div>

Hi all,

I just put out an update (v4.2.6) that fixes a fairly impactful bug in the _ExternalBlock.Import_ node. If you use that node, I suggest installing the latest version ASAP to get the fix. There was just a single line of code that resulted in the entire source DWG being inserted into the destination drawing as a block. Whoops! 🤦‍♂️

---

<div class="post-metadata">

**Author:** ![patrick.ericson](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/patrick.ericson/32/121411_2.png) [@patrick.ericson](https://forum.dynamobim.com/u/patrick.ericson)\
**Post date:** [April 1, 2023, 6:21am UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/403 "2023-04-01T06:21:00Z")

</div>

Oups  
Good work to find the bug.

---

<div class="post-metadata">

**Author:** ![emilezankoulHGWH9](https://avatars.discourse-cdn.com/v4/letter/e/f05b48/32.png) [@emilezankoulHGWH9](https://forum.dynamobim.com/u/emilezankoulHGWH9)\
**Post date:** [April 1, 2023, 9:46pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/404 "2023-04-01T21:46:50Z")

</div>

_Edited by @mzjensen_  
_The following is a comment about the GeneralSegmentLabel.ByObject node._

* * *

This is great! However, it doesn’t seem to work on closed feature lines. Is that expected? If so, is there a workaround? Thank you!

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [April 1, 2023, 11:52pm UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/405 "2023-04-01T23:52:33Z")

</div>

The segment count should just be equal to the point count in that case.

---

<div class="post-metadata">

**Author:** ![emilezankoulHGWH9](https://avatars.discourse-cdn.com/v4/letter/e/f05b48/32.png) [@emilezankoulHGWH9](https://forum.dynamobim.com/u/emilezankoulHGWH9)\
**Post date:** [April 2, 2023, 12:14am UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/406 "2023-04-02T00:14:21Z")

</div>

The node itself doesn’t seem to work for closed feature lines. Not just the node with the segcount code.

---

<div class="post-metadata">

**Author:** ![mzjensen](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@mzjensen](https://forum.dynamobim.com/u/mzjensen)\
**Post date:** [April 2, 2023, 4:44am UTC](https://forum.dynamobim.com/t/camber-feedback-thread/68942/407 "2023-04-02T04:44:06Z")

</div>

Which node?

[Previous page](https://forum.dynamobim.com/t/camber-feedback-thread/68942.md?page=19)

[Next page](https://forum.dynamobim.com/t/camber-feedback-thread/68942.md?page=21)
