# Build a pipeline

**URL:** <https://forum.dynamobim.com/t/build-a-pipeline/84744>\
**Category:** Revit\
**Tags:** revit, geometry, dynamo\
**Created:** [January 8, 2023, 4:12pm UTC](https://forum.dynamobim.com/t/build-a-pipeline/84744 "2023-01-08T16:12:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ssergey61296](https://avatars.discourse-cdn.com/v4/letter/s/eada6e/32.png) [@ssergey61296](https://forum.dynamobim.com/u/ssergey61296)\
**Post date:** [January 8, 2023, 4:12pm UTC](https://forum.dynamobim.com/t/build-a-pipeline/84744/1 "2023-01-08T16:12:07Z")

</div>

Hey  
I’m trying to build a pipeline through two points using Dynamo.  
But pipelines, air ducts are not families. They are not in the FamilyInstance.Type node.  
How do I choose a pipeline model through Dynamo?

---

<div class="post-metadata">

**Author:** ![Draxl\_Andreas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/draxl_andreas/32/145744_2.png) [@Draxl\_Andreas](https://forum.dynamobim.com/u/Draxl_Andreas)\
**Post date:** [January 8, 2023, 6:02pm UTC](https://forum.dynamobim.com/t/build-a-pipeline/84744/2 "2023-01-08T18:02:05Z")

</div>

> [@Create a Pipe from Point A to Point B](https://forum.dynamobim.com/t/create-a-pipe-from-point-a-to-point-b/16499):
>
> Hello friends, I’ve just started using dynamo few days ago. I’ve created a basic graph that creates two point (A,B). Now, I would like to create a pipe whose open-end becomes point A and its close-end becomes point B as shown in the following image below but I’m struggling doing it in the dynamo, would appreciate if someone provide any guide that would help me to achieve this functionality in dynamo. Thank you
