# Automatically placing pipe fittings or valves on piperun

**URL:** <https://forum.dynamobim.com/t/automatically-placing-pipe-fittings-or-valves-on-piperun/52328>\
**Category:** Civil 3D\
**Tags:** dynamo\
**Created:** [June 27, 2020, 4:04am UTC](https://forum.dynamobim.com/t/automatically-placing-pipe-fittings-or-valves-on-piperun/52328 "2020-06-27T04:04:21Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![leomh.kwan](https://avatars.discourse-cdn.com/v4/letter/l/73ab20/32.png) [@leomh.kwan](https://forum.dynamobim.com/u/leomh.kwan)\
**Post date:** [June 27, 2020, 4:04am UTC](https://forum.dynamobim.com/t/automatically-placing-pipe-fittings-or-valves-on-piperun/52328/1 "2020-06-27T04:04:21Z")

</div>

Is it possible to automatically place pipe fittings (i.e. elbow or tee) or valves on a piperun (alignment or polyline)?  
In the condition that the coordinates of pipe fittings are acquired.

 ![Q_fitting_1](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/2/b2525a9bc2a759a4822c538c08ef2da638390e57.png)