# Automatically generate 3D views or Scope Boxes along an alignment **URL:** \ **Category:** Revit\ **Tags:** dynamo\ **Created:** [June 19, 2025, 8:06am UTC](https://forum.dynamobim.com/t/automatically-generate-3d-views-or-scope-boxes-along-an-alignment/110829 "2025-06-19T08:06:28Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![RMohareb](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/rmohareb/32/120534_2.png) [@RMohareb](https://forum.dynamobim.com/u/RMohareb)\ **Post date:** [July 1, 2025, 12:21pm UTC](https://forum.dynamobim.com/t/automatically-generate-3d-views-or-scope-boxes-along-an-alignment/110829/6 "2025-07-01T12:21:44Z")
Hi @onehojoe, If you have the alignment in C3D, you can get the coordinate system at the location (station) and use it to generate the view box you need. You can use the **BriMohareb\_XXXX** package to access the corridor in C3D and get the coordinate system you need. > [@"BriMohareb\_XXXX" Package for RevitXXXX Thread](https://forum.dynamobim.com/t/brimohareb-xxxx-package-for-revitxxxx-thread/84362): > > This packedge use Dynamo Revit\_2023 as plateform to integrating Revit\_23, Civil3d\_23 , Autocad, sofistik\_2018, sofistik\_2023 and Add extra geometry nodes to dynamo through API. It help bridge and tunnel engineers to create and Automate automate model and design. Also makes it possible to create complex bridge and tunnel elements by using Adaptive family ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/8/0/809f517e349d3946d8d5301acb962d181c909865.png) If not, you can get the coordinate system at a polyline by using this node, also from the same package. ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/0/0/00eba46f61ada09bf0e86401dc2eed0b0afab543.png) **DO NOT** get the CS at curve from the default Dynamo node. --- _[View the full topic](https://forum.dynamobim.com/t/automatically-generate-3d-views-or-scope-boxes-along-an-alignment/110829)._