# Automatic Break of the pressure pipes by it cut length on the plan CIvil 3D

**URL:** <https://forum.dynamobim.com/t/automatic-break-of-the-pressure-pipes-by-it-cut-length-on-the-plan-civil-3d/86519>\
**Category:** Civil 3D\
**Tags:** civil3d\
**Created:** [February 23, 2023, 9:21am UTC](https://forum.dynamobim.com/t/automatic-break-of-the-pressure-pipes-by-it-cut-length-on-the-plan-civil-3d/86519 "2023-02-23T09:21:39Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![hosneyalaa](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/hosneyalaa/32/100865_2.png) [@hosneyalaa](https://forum.dynamobim.com/u/hosneyalaa)\
**Post date:** [February 23, 2023, 8:09pm UTC](https://forum.dynamobim.com/t/automatic-break-of-the-pressure-pipes-by-it-cut-length-on-the-plan-civil-3d/86519/2 "2023-02-23T20:09:25Z")

</div>

Hi

Looking at this

> [@Pressure Pipe Runs & Add Fittings](https://forum.dynamobim.com/t/pressure-pipe-runs-add-fittings/77368/13):
>
> @Ahmed.Kamal.Moussa Here is your solution. Make sure the only alignments being fed into python are the pressure pipe network alignments. [AddTees.dyn](https://forum.dynamobim.com/uploads/short-url/sORPAuKcpb3Vl1SdodUr2NKOtmk.dyn) (75.9 KB) [AddTees-postScript.dwg](https://forum.dynamobim.com/uploads/short-url/fZM1F7g9kxOXKmNjlbw4Hxe8PVa.dwg) (1017.8 KB) [AddTees-preScript.dwg](https://forum.dynamobim.com/uploads/short-url/4i6XInsqh53bRTQkGXVcMVP9WA3.dwg) (1008.0 KB)

---

_[View the full topic](https://forum.dynamobim.com/t/automatic-break-of-the-pressure-pipes-by-it-cut-length-on-the-plan-civil-3d/86519)._