# Auto section for columns

**URL:** <https://forum.dynamobim.com/t/auto-section-for-columns/91342>\
**Category:** Revit\
**Tags:** revit, dynamo\
**Created:** [July 2, 2023, 12:34pm UTC](https://forum.dynamobim.com/t/auto-section-for-columns/91342 "2023-07-02T12:34:09Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![gerhard.p](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/gerhard.p/32/147675_2.png) [@gerhard.p](https://forum.dynamobim.com/u/gerhard.p)\
**Post date:** [July 3, 2023, 8:56am UTC](https://forum.dynamobim.com/t/auto-section-for-columns/91342/9 "2023-07-03T08:56:43Z")

</div>

Hello @nia98bim

I have a graph that makes sections and planviews for columns, adds dimensioning and annotations, rotates the views, etc.

It is based on this post:

> **[Element View Generation in Revit with Dynamo](https://revitbeyondbim.wordpress.com/2017/02/10/element-view-generation-in-revit-with-dynamo-revised/)**
>
> In October 2015, I wrote this post on this blog about how to automate the generation of detail (section) views of some specific Revit elements by means of a Dynamo graph. With the functionalities a…

My dyns for create/annotate, dimension sections, dimension planviews:  
[08\_1\_Stützen\_Ansichten\_erstellen.dyn](https://forum.dynamobim.com/uploads/short-url/f00XA3vsMGQpjajXSCP3rIRRPTX.dyn) (1.1 MB)  
[08\_2\_Stützen\_Ansichten\_Bemaßung.dyn](https://forum.dynamobim.com/uploads/short-url/j4Xnba3ePF173xYxC18gXDwtwQF.dyn) (493.4 KB)  
[08\_3\_Stützen\_Grundriss\_Bemaßung.dyn](https://forum.dynamobim.com/uploads/short-url/tC41zIN4TJaygziEs9l2wB671D1.dyn) (142.9 KB)

 ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/7/2/72e74a40a67a4697359d20eb873c83bfa454e6f3.jpeg)

Some threads to the topic:

> [@Transform Points and Faces to View Coordinatesystem for dimensioning](https://forum.dynamobim.com/t/transform-points-and-faces-to-view-coordinatesystem-for-dimensioning/73995):
>
> Hello Dynamo Friends slight_smile I can dimension a column by getting faces, vertices, points and then taking some points by their index. To make this work for other columns i have to get the points i need by their location and not just by index. So let´s start with the PlanView, i have to make a rectangle out of the column for the dimensioning line location. To getting started i want to get the corner points of the column, but I´m even struggling with that: Ge…

> [@Get Front Surface of Element in View](https://forum.dynamobim.com/t/get-front-surface-of-element-in-view/77829):
>
> Hello Dynamo Friends! slight_smile I want to dimension columns like in the following view. Therefore i have to identify the surface that I´m looking at in the view. Later i want to offset the line i need for the position of the dimensioning. I could achieve what i want but it was a pretty wild ride and so i just wanted to ask if you have some advice on how i could get my results easier! Here in Steps and pictures what i did: Create View Coordinate System Get Faces and Points Tra…

> [@Columns - get geometry, face, vertices](https://forum.dynamobim.com/t/columns-get-geometry-face-vertices/61780):
>
> Hello Dynamo Community! I want to get the outline or points of a Column in a section view. I need that to place tags, detail elements, elevation marks and maybe for dimensioning. I don`t really know how to start, just a little first try: Only thing i can get to work is getting the centroid point: Would be happy about some advice slight_smile THANKS! Kind regards!

> [@Get Rotation of Columns and rotate views](https://forum.dynamobim.com/t/get-rotation-of-columns-and-rotate-views/61538):
>
> Good evening Dynamo Community! I have created front views and planviews of columns and now I want to rotate the planview to match the orientation of the front view. I use a Vector from the front surface of the column and a new vector to get the rotation between the two vectors. Now I´m getting different angles depending on the vector direction respectively the location of the front surface, i think. Here are the angles I get for these two columns. I think they are not correct because they sho…

> [@Dimension Columns - Dimensioning by Points?](https://forum.dynamobim.com/t/dimension-columns-dimensioning-by-points/72300):
>
> Hello Dynamo Friends slight_smile I´m playing around with dimensioning and i can dimension columns by faces. Like this: and also like that: Result: Now i want to add the following dimensions in a section view: And this wont work with parallel faces so i started by getting the points i need: And now i would need a method to dimension by points, is there anything like that out there? Can i make an ElementGeometryReferences from a point? K…

---

_[View the full topic](https://forum.dynamobim.com/t/auto-section-for-columns/91342)._
