# Assign a Schedule to a view (elevation or floor plan)

**URL:** <https://forum.dynamobim.com/t/assign-a-schedule-to-a-view-elevation-or-floor-plan/58731>\
**Category:** Revit\
**Created:** [December 28, 2020, 6:27am UTC](https://forum.dynamobim.com/t/assign-a-schedule-to-a-view-elevation-or-floor-plan/58731 "2020-12-28T06:27:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![davemortimer\_70](https://avatars.discourse-cdn.com/v4/letter/d/b9bd4f/32.png) [@davemortimer\_70](https://forum.dynamobim.com/u/davemortimer_70)\
**Post date:** [December 28, 2020, 6:27am UTC](https://forum.dynamobim.com/t/assign-a-schedule-to-a-view-elevation-or-floor-plan/58731/1 "2020-12-28T06:27:03Z")

</div>

Hi all and thank you. I am an experienced revit user (structure) but very new to dynamo. I am struggling to see any what use dynamo will have in my area of modeling and presentation. One thing I would like to try to do is create a schedule that matches a view. imagine there is 50 different types of columns in a project. 10 types on the ground floor, 10 on each of the next 4 levels, is there away in dynamo to filter the schedule to only show the columns on that said floor by using view range or assign to a view. (ground floor column schedule.

thanks in advance

---

<div class="post-metadata">

**Author:** ![bvs1982](https://avatars.discourse-cdn.com/v4/letter/b/43a26b/32.png) [@bvs1982](https://forum.dynamobim.com/u/bvs1982)\
**Post date:** [December 28, 2020, 9:33am UTC](https://forum.dynamobim.com/t/assign-a-schedule-to-a-view-elevation-or-floor-plan/58731/2 "2020-12-28T09:33:20Z")

</div>

For my information (also because i don’t fully understand your question);

You know you can do that in Revit  
(without using Dynamo)?