# Arc information

**URL:** <https://forum.dynamobim.com/t/arc-information/99277>\
**Category:** Dynamo Player\
**Created:** [March 20, 2024, 11:17pm UTC](https://forum.dynamobim.com/t/arc-information/99277 "2024-03-20T23:17:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alisadeq](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@Alisadeq](https://forum.dynamobim.com/u/Alisadeq)\
**Post date:** [March 20, 2024, 11:17pm UTC](https://forum.dynamobim.com/t/arc-information/99277/1 "2024-03-20T23:17:39Z")

</div>

When I draw an arc, I need the starting point, the end point, and the radius, but how can I get this information start and end point from the arc?

 ![Captureddd](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/6/c/6c5c03126b55cf531460abfa7955f227da9bb5ae.png)

---

<div class="post-metadata">

**Author:** ![jacob.small](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/jacob.small/32/161030_2.png) [@jacob.small](https://forum.dynamobim.com/u/jacob.small)\
**Post date:** [March 20, 2024, 11:21pm UTC](https://forum.dynamobim.com/t/arc-information/99277/2 "2024-03-20T23:21:46Z")

</div>

Curve.EndPoint, Curve.StartPoint, or Curve.PointAtParameter.

In design script you can also use `Curve.PointAtParameter(theArcs@L1<1>, [0,1]);`

---

<div class="post-metadata">

**Author:** ![Alisadeq](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@Alisadeq](https://forum.dynamobim.com/u/Alisadeq)\
**Post date:** [March 20, 2024, 11:50pm UTC](https://forum.dynamobim.com/t/arc-information/99277/3 "2024-03-20T23:50:16Z")

</div>

thank you so much
