# Approximate surface with planes

**URL:** <https://forum.dynamobim.com/t/approximate-surface-with-planes/2992>\
**Category:** Packages\
**Created:** [January 21, 2016, 9:04am UTC](https://forum.dynamobim.com/t/approximate-surface-with-planes/2992 "2016-01-21T09:04:47Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pedro\_Pinheiro](https://avatars.discourse-cdn.com/v4/letter/p/6a8cbe/32.png) [@Pedro\_Pinheiro](https://forum.dynamobim.com/u/Pedro_Pinheiro)\
**Post date:** [January 21, 2016, 9:04am UTC](https://forum.dynamobim.com/t/approximate-surface-with-planes/2992/1 "2016-01-21T09:04:47Z")

</div>

Hello everyone,

Does anyone have an idea how i could approximate a surface with plans and control the number of planes?

---

<div class="post-metadata">

**Author:** ![Vikram\_Subbaiah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/vikram_subbaiah/32/50797_2.png) [@Vikram\_Subbaiah](https://forum.dynamobim.com/u/Vikram_Subbaiah)\
**Post date:** [January 21, 2016, 9:31am UTC](https://forum.dynamobim.com/t/approximate-surface-with-planes/2992/2 "2016-01-21T09:31:24Z")

</div>

As planes have no boundaries, I’m not sure you can. However, I suppose you’re looking for something like this…

 ![20160121-3](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/2/28b9aa07fe5f138a1da29420552d206e6748f8e3.png)

Haven’t tested, might need some tweaking

---

<div class="post-metadata">

**Author:** ![Organon](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/organon/32/161404_2.png) [@Organon](https://forum.dynamobim.com/u/Organon)\
**Post date:** [January 21, 2016, 11:19am UTC](https://forum.dynamobim.com/t/approximate-surface-with-planes/2992/3 "2016-01-21T11:19:58Z")

</div>

> **[Back to 'Basics' with LunchBox and Dynamo](http://www.theprovingground.org/2015/04/back-to-basics-with-lunchbox-and-dynamo.html)**
>
> Divide a surface to get points, normals, planes, and curvature. With the rapid expansion of Dynamo, it is easy to overlook the fact that...

> **[LunchBox - New Rationalization Nodes and Panel Improvements](http://www.theprovingground.org/2015/03/lunchbox-new-rationalization-nodes-and.html)**
>
> "Planarize Points" node will project a collection of points to a common plane. A new release of LunchBox for Dynamo has been posted to t...

---

<div class="post-metadata">

**Author:** ![Pedro\_Pinheiro](https://avatars.discourse-cdn.com/v4/letter/p/6a8cbe/32.png) [@Pedro\_Pinheiro](https://forum.dynamobim.com/u/Pedro_Pinheiro)\
**Post date:** [January 21, 2016, 11:47am UTC](https://forum.dynamobim.com/t/approximate-surface-with-planes/2992/4 "2016-01-21T11:47:56Z")

</div>

Thank you both so much!

I will test it as soon as possible.

What i am trying to achieve is to create several planer surfaces that can approximate to a non planar surface.

---

<div class="post-metadata">

**Author:** ![Vikram\_Subbaiah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/vikram_subbaiah/32/50797_2.png) [@Vikram\_Subbaiah](https://forum.dynamobim.com/u/Vikram_Subbaiah)\
**Post date:** [January 21, 2016, 7:48pm UTC](https://forum.dynamobim.com/t/approximate-surface-with-planes/2992/5 "2016-01-21T19:48:53Z")

</div>

Then, _Surface Triangulation_ is what you need to work on.

The _planes_ would then be incidental.
