# Applying Voronoi to a flat surface

**URL:** <https://forum.dynamobim.com/t/applying-voronoi-to-a-flat-surface/2468>\
**Category:** Packages\
**Created:** [October 29, 2015, 4:51pm UTC](https://forum.dynamobim.com/t/applying-voronoi-to-a-flat-surface/2468 "2015-10-29T16:51:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alexander\_Muentener](https://avatars.discourse-cdn.com/v4/letter/a/9e8a1a/32.png) [@Alexander\_Muentener](https://forum.dynamobim.com/u/Alexander_Muentener)\
**Post date:** [October 29, 2015, 4:51pm UTC](https://forum.dynamobim.com/t/applying-voronoi-to-a-flat-surface/2468/1 "2015-10-29T16:51:48Z")

</div>

Hey Everyone, I’m working on a project for a class that I’m in at the BAC for advanced revit and dynamo. I’ve created a surface from selected elements off of an existing model, and have also created an adaptive curtain wall panel that I’m applying over it. I’m trying to create a Voronoi grid pattern on the surface for the panel to follow. So far I’ve only been able to get the voronoi to apply over a curved surface, does anyone have any idea on how to apply this over a flat surface? Or if not any suggestions on other nodes that I could use to achieve this goal? The first image below is an example of the look I’m trying to achieve and the second is what I’ve come up with so far… Any help is appreciated!

![Capture2](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex022/uploads/dynamobim/original/2X/6/676c615385c7aa40d3c9506f1bff9d15c2033eaf.png)

![Capture](https://cdck-file-uploads-us1.s3.dualstack.us-west-2.amazonaws.com/flex022/uploads/dynamobim/original/2X/4/419e97dc946ff4ea71dc0165bc512b0797717e1e.png)

---

<div class="post-metadata">

**Author:** ![Angola](https://avatars.discourse-cdn.com/v4/letter/a/f05b48/32.png) [@Angola](https://forum.dynamobim.com/u/Angola)\
**Post date:** [May 17, 2016, 5:07am UTC](https://forum.dynamobim.com/t/applying-voronoi-to-a-flat-surface/2468/2 "2016-05-17T05:07:35Z")

</div>

Would love to know this too.

---

<div class="post-metadata">

**Author:** ![Vikram\_Subbaiah](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/vikram_subbaiah/32/50797_2.png) [@Vikram\_Subbaiah](https://forum.dynamobim.com/u/Vikram_Subbaiah)\
**Post date:** [May 17, 2016, 5:45am UTC](https://forum.dynamobim.com/t/applying-voronoi-to-a-flat-surface/2468/3 "2016-05-17T05:45:38Z")

</div>

Refer to [this](http://dynamobim.org/forums/topic/tessellation-on-face/) discussion