# Align two planes in the same family to a curve

**URL:** <https://forum.dynamobim.com/t/align-two-planes-in-the-same-family-to-a-curve/4970>\
**Category:** Revit\
**Created:** [July 11, 2016, 8:32am UTC](https://forum.dynamobim.com/t/align-two-planes-in-the-same-family-to-a-curve/4970 "2016-07-11T08:32:51Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![piserte](https://avatars.discourse-cdn.com/v4/letter/p/35a633/32.png) [@piserte](https://forum.dynamobim.com/u/piserte)\
**Post date:** [July 11, 2016, 8:32am UTC](https://forum.dynamobim.com/t/align-two-planes-in-the-same-family-to-a-curve/4970/1 "2016-07-11T08:32:51Z")

</div>

Ok, here is the situation:

I need to create an adaptive family that adapts itself to a curve. There are two different sections in two different planes which i will use to make a loft, and each plane has to be normal to the curve every 12 meters.

As of now, i have created two different adaptive families with 3 reference points each one (as indicated in this post: [http://dynamobim.org/forums/topic/align-objects-with-a-3d-curve/](http://dynamobim.org/forums/topic/align-objects-with-a-3d-curve/)), which generates 2 profiles in their correct 3d position in dynamo. I can loft them and i get my geometry.

My problem is that the geometry is a mass, not a proper family. I would like to know if there is any chance to use reference lines or 3+3, 6 reference points to create two planes.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/e/e798669fe709b4845a64ef8eeddb1859eb643692.jpg)

---

<div class="post-metadata">

**Author:** ![Andreas\_Dieckmann](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/andreas_dieckmann/32/365_2.png) [@Andreas\_Dieckmann](https://forum.dynamobim.com/u/Andreas_Dieckmann)\
**Post date:** [July 11, 2016, 5:11pm UTC](https://forum.dynamobim.com/t/align-two-planes-in-the-same-family-to-a-curve/4970/2 "2016-07-11T17:11:15Z")

</div>

I’m curious: Why don’t you generate your geometry in the AC family?

---

<div class="post-metadata">

**Author:** ![piserte](https://avatars.discourse-cdn.com/v4/letter/p/35a633/32.png) [@piserte](https://forum.dynamobim.com/u/piserte)\
**Post date:** [July 12, 2016, 6:33am UTC](https://forum.dynamobim.com/t/align-two-planes-in-the-same-family-to-a-curve/4970/3 "2016-07-12T06:33:25Z")

</div>

Well… that is somehow what i’m asking: how to do it 😃  
When i join in a single host family my individual nested families with their individuals reference points… It works in the Family creator. I get a working geometry in the creator. But then in Dynamo those 6 points (3 from every family) don’t seem to work

---

<div class="post-metadata">

**Author:** ![Andreas\_Dieckmann](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/andreas_dieckmann/32/365_2.png) [@Andreas\_Dieckmann](https://forum.dynamobim.com/u/Andreas_Dieckmann)\
**Post date:** [July 12, 2016, 8:34am UTC](https://forum.dynamobim.com/t/align-two-planes-in-the-same-family-to-a-curve/4970/4 "2016-07-12T08:34:44Z")

</div>

First thing to test: Does the family work as intended when you place it manually in a project (e.g. hosted on curves). If so: You seem to be using the wrong component in Dynamo, if not: there’s likely something wrong with the placement point orientation.

---

<div class="post-metadata">

**Author:** ![piserte](https://avatars.discourse-cdn.com/v4/letter/p/35a633/32.png) [@piserte](https://forum.dynamobim.com/u/piserte)\
**Post date:** [July 15, 2016, 2:58pm UTC](https://forum.dynamobim.com/t/align-two-planes-in-the-same-family-to-a-curve/4970/5 "2016-07-15T14:58:20Z")

</div>

I kind of got around the problem generating my geometry inside of the family creator. It still doesn’t behave properly with 6 adaptive points, but i don’t have the time right now to check. I’ll keep you informed as along as i revisit the problem.

Thank u guys!
