# Air terminal set parameter mark by room and number **URL:** \ **Category:** Revit\ **Created:** [April 1, 2023, 4:16am UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072 "2023-04-01T04:16:00Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![candok4545](https://avatars.discourse-cdn.com/v4/letter/c/aeb1de/32.png) [@candok4545](https://forum.dynamobim.com/u/candok4545)\ **Post date:** [April 1, 2023, 4:16am UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/1 "2023-04-01T04:16:00Z")
Continuing the discussion from [Revit duct equipment](https://forum.dynamobim.com/t/revit-duct-equipment/87516/39): [air terminal set parameter mark by room and number.dyn](https://forum.dynamobim.com/uploads/short-url/zzs9XYWRMrOgHUyqAoeTR7TOu2q.dyn) (19.4 KB) ![air terminal set parameter mark by room and number_2023-03-31_12-10-16](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/6/b/6b0dbea2436c57395a6a77334b7ec5eee21e6198.png) These are the last works I have, I wanted to bring it up again, maybe we can find a solution 😕 ---
**Author:** ![Draxl\_Andreas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/draxl_andreas/32/145744_2.png) [@Draxl\_Andreas](https://forum.dynamobim.com/u/Draxl_Andreas)\ **Post date:** [April 2, 2023, 8:33pm UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/2 "2023-04-02T20:33:25Z")
@candok4545 , i am faceing a similar issue Can you check first if room calculation point is on… you can also based on your linked roomes, creating MEP Spaces… ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/0/0/003aac696034327d2efff32b28df87e77258076d.png) ![2023-04-02_22h36_07](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/2/1/212f61e1c680e8f1e142b4040b9bfbd5ebbd359a.png) > [@How to get the room from my linked electrical elements?](https://forum.dynamobim.com/t/how-to-get-the-room-from-my-linked-electrical-elements/87875/3): > > @Nick_Boyts , how can i get the outlets? room by room… ? Geoemtry intersect? KR Andreas by the way check also your list.Levels ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/f/4/f4deeee41197d92d8207aad35cd2e36feb3648f0.png) KR Andreas ---
**Author:** ![candok4545](https://avatars.discourse-cdn.com/v4/letter/c/aeb1de/32.png) [@candok4545](https://forum.dynamobim.com/u/candok4545)\ **Post date:** [April 3, 2023, 9:22am UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/3 "2023-04-03T09:22:31Z")
I solved the problem, I understand what you mean, the room numbers are not posed correctly in any way. I also need to create spaces as you said. I guess I have to deal with that now. Do you have any opinion on this subject? ---
**Author:** ![Draxl\_Andreas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/draxl_andreas/32/145744_2.png) [@Draxl\_Andreas](https://forum.dynamobim.com/u/Draxl_Andreas)\ **Post date:** [April 3, 2023, 10:22am UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/4 "2023-04-03T10:22:36Z")
@candok4545 , opinion regarding what ? MEP-Spaces and Rooms? most important thing is that you client is fully aware to have a design-freeze. Where you can work on! On a constantly changing project is difficult to make any kind of calculation… KR Andreas ---
**Author:** ![candok4545](https://avatars.discourse-cdn.com/v4/letter/c/aeb1de/32.png) [@candok4545](https://forum.dynamobim.com/u/candok4545)\ **Post date:** [April 3, 2023, 10:28am UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/5 "2023-04-03T10:28:08Z")
I don t understand what you want to say ---
**Author:** ![Draxl\_Andreas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/draxl_andreas/32/145744_2.png) [@Draxl\_Andreas](https://forum.dynamobim.com/u/Draxl_Andreas)\ **Post date:** [April 3, 2023, 10:28am UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/6 "2023-04-03T10:28:48Z")
@candok4545 , you mean the topic MEP-Spaces and Rooms ? ---
**Author:** ![candok4545](https://avatars.discourse-cdn.com/v4/letter/c/aeb1de/32.png) [@candok4545](https://forum.dynamobim.com/u/candok4545)\ **Post date:** [April 3, 2023, 10:30am UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/7 "2023-04-03T10:30:02Z")
yes i want to create mep spaces from linked rooms, and i don’t do these for a client, i do it purely for learning ---
**Author:** ![Draxl\_Andreas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/draxl_andreas/32/145744_2.png) [@Draxl\_Andreas](https://forum.dynamobim.com/u/Draxl_Andreas)\ **Post date:** [April 3, 2023, 10:32am UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/8 "2023-04-03T10:32:43Z")
@candok4545 , sorry, i am a little bit traumatizet… i am fully in project work… and People with a lot of money behave like a diva 😉 OK… Information mapping can be intressing for you. KR Andreas ---
**Author:** ![candok4545](https://avatars.discourse-cdn.com/v4/letter/c/aeb1de/32.png) [@candok4545](https://forum.dynamobim.com/u/candok4545)\ **Post date:** [April 3, 2023, 11:41am UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/9 "2023-04-03T11:41:33Z")
![sssasdasd_2023-04-03_02-40-28](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/9/4/94a5974f4f0d5f5fcfbe094cf042b7ee0ab2eacf.png) I entered all everything but it gave an error like this, how can I solve it? ---
**Author:** ![Draxl\_Andreas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/draxl_andreas/32/145744_2.png) [@Draxl\_Andreas](https://forum.dynamobim.com/u/Draxl_Andreas)\ **Post date:** [April 3, 2023, 11:44am UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/10 "2023-04-03T11:44:14Z")
@candok4545 , be aware you need same numbers… a correlation between element.count and parameter to fill! ![grafik](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/e/9/e9119a0c5b7512043f0fcd49f1851f1a636c7f1f.jpeg) i recomment you to create a new topic, for getting more answers. KR Andreas ---
**Author:** ![candok4545](https://avatars.discourse-cdn.com/v4/letter/c/aeb1de/32.png) [@candok4545](https://forum.dynamobim.com/u/candok4545)\ **Post date:** [April 3, 2023, 12:30pm UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/11 "2023-04-03T12:30:20Z")
![air terminal set parameter mark by room and number (2)_2023-04-03_03-26-44](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/c/a/ca095ede0e504222f349ba822ff9f775624b7385.png) I managed to create spaces from room points, but when I transfer them to air terminals, it still sees them incorrectly… and also when I create spaces schedule, the area and volume tabs do not appear, is it normal that they only appear as dots? ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/3/2/325e13079c9fac154b59d6970a8a0b2d7f360d01.png) i know it creates a void from a point how can i translate it to a surface ---
**Author:** ![Draxl\_Andreas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/draxl_andreas/32/145744_2.png) [@Draxl\_Andreas](https://forum.dynamobim.com/u/Draxl_Andreas)\ **Post date:** [April 3, 2023, 12:44pm UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/12 "2023-04-03T12:44:21Z")
@candok4545 , do you have linked elements ? i think you have to say your link room bounding ---
**Author:** ![candok4545](https://avatars.discourse-cdn.com/v4/letter/c/aeb1de/32.png) [@candok4545](https://forum.dynamobim.com/u/candok4545)\ **Post date:** [April 3, 2023, 1:15pm UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/13 "2023-04-03T13:15:48Z")
all the problems I’ve encountered so far are because the architecture is shared coordinates… I’m both angry and laughing at myself 🙂 how can I get the architectural plan from the shared coordinates to the internal origin ![image](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/2/1/21b96837fda7cb12202bcfecb2ac14ddc21282ec.png) ---
**Author:** ![Draxl\_Andreas](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/draxl_andreas/32/145744_2.png) [@Draxl\_Andreas](https://forum.dynamobim.com/u/Draxl_Andreas)\ **Post date:** [April 3, 2023, 1:17pm UTC](https://forum.dynamobim.com/t/air-terminal-set-parameter-mark-by-room-and-number/88072/14 "2023-04-03T13:17:59Z")
@candok4545 , thanks to god, that you are not in a real project… 😉 > [@Move the Internal Project Origin keeping geometry in same place than before](https://forum.dynamobim.com/t/move-the-internal-project-origin-keeping-geometry-in-same-place-than-before/64062): > > Hello, is there a way in Revit to move the internal project origin keeping the geometry in same place than before moving it? I do not want to think that the only solution is moving the entire project things and views, I am open to see alternatives available in the software. Before Revit 2020 I was able to do it with the clips of project points I guess, but now all gone.