# Adding Shared Parameters to Family Directory

**URL:** <https://forum.dynamobim.com/t/adding-shared-parameters-to-family-directory/17031>\
**Category:** Revit\
**Created:** [December 1, 2017, 6:08pm UTC](https://forum.dynamobim.com/t/adding-shared-parameters-to-family-directory/17031 "2017-12-01T18:08:48Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![emcgann](https://avatars.discourse-cdn.com/v4/letter/e/ecccb3/32.png) [@emcgann](https://forum.dynamobim.com/u/emcgann)\
**Post date:** [December 1, 2017, 6:08pm UTC](https://forum.dynamobim.com/t/adding-shared-parameters-to-family-directory/17031/1 "2017-12-01T18:08:48Z")

</div>

I was following the steps in this post and get “Application Close Document operation failed” What did I miss??? Thank you!

[Adding Shared Parameters to a family](https://forum.dynamobim.com/t/adding-shared-parameters-to-a-family/11540/36)

 ![BulkUpgrade-sharedParameter_2](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/b/f/bf3527d23b8891e0e50b4c1ef1f9261f72e34903.png)

---

<div class="post-metadata">

**Author:** ![MJB-online](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/mjb-online/32/24884_2.png) [@MJB-online](https://forum.dynamobim.com/u/MJB-online)\
**Post date:** [December 1, 2017, 6:38pm UTC](https://forum.dynamobim.com/t/adding-shared-parameters-to-family-directory/17031/2 "2017-12-01T18:38:41Z")

</div>

Hi @emcgann,

Currently you have two nodes at the same time trying to open the families in the background. I’m not sure if that might be a problem. Also can you put a watch-node on these two nodes (or one of them) so we can see if the families are actualy opened.

Kind regards,  
Mark

---

<div class="post-metadata">

**Author:** ![emcgann](https://avatars.discourse-cdn.com/v4/letter/e/ecccb3/32.png) [@emcgann](https://forum.dynamobim.com/u/emcgann)\
**Post date:** [December 1, 2017, 6:50pm UTC](https://forum.dynamobim.com/t/adding-shared-parameters-to-family-directory/17031/3 "2017-12-01T18:50:35Z")

</div>

Thank you for the response!

If I connect File.LoadFamily|DanEDU --\> my Watch returns my list of families

If I connect Application.OpenDocument File --\> my Watch returns Autodesk.Revit.DB.Document

Regardless - I get the same error “Application Close Document Operation Failed”

 ![BulkUpgrade-sharedParameter_3](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/3X/1/b/1b27f445b082ea1a27c81318326010e15a560884.png)

---

<div class="post-metadata">

**Author:** ![MJB-online](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/mjb-online/32/24884_2.png) [@MJB-online](https://forum.dynamobim.com/u/MJB-online)\
**Post date:** [December 1, 2017, 7:09pm UTC](https://forum.dynamobim.com/t/adding-shared-parameters-to-family-directory/17031/4 "2017-12-01T19:09:04Z")

</div>

Hi @emcgann

In your second picture you have not selected a parametergroup, but in your fist picture you did so i don’t think that’s the problem. If a restart of Revit + Dynamo doesn’t help i don’t think i can help you further with this.

Kind regards,  
Mark

---

<div class="post-metadata">

**Author:** ![emcgann](https://avatars.discourse-cdn.com/v4/letter/e/ecccb3/32.png) [@emcgann](https://forum.dynamobim.com/u/emcgann)\
**Post date:** [December 1, 2017, 7:13pm UTC](https://forum.dynamobim.com/t/adding-shared-parameters-to-family-directory/17031/5 "2017-12-01T19:13:14Z")

</div>

Thank you! Restarting fixed it! I am new to Dynamo and didn’t even think to try that! Thank you for your quick response.

---

<div class="post-metadata">

**Author:** ![MJB-online](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/mjb-online/32/24884_2.png) [@MJB-online](https://forum.dynamobim.com/u/MJB-online)\
**Post date:** [December 1, 2017, 7:31pm UTC](https://forum.dynamobim.com/t/adding-shared-parameters-to-family-directory/17031/7 "2017-12-01T19:31:42Z")

</div>

I’m glad I could help 😀

Kind regards,  
Mark
