# Add Rows data to Key Schedule **URL:** \ **Category:** Uncategorized\ **Tags:** schedule\ **Created:** [April 27, 2023, 11:36am UTC](https://forum.dynamobim.com/t/add-rows-data-to-key-schedule/89015 "2023-04-27T11:36:49Z")\ **Posts on this page:** 1\ **Showing post:** 10
**Author:** ![staylor](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/staylor/32/94307_2.png) [@staylor](https://forum.dynamobim.com/u/staylor)\ **Post date:** [April 28, 2023, 2:52pm UTC](https://forum.dynamobim.com/t/add-rows-data-to-key-schedule/89015/10 "2023-04-28T14:52:33Z")
Look at Key Schedule node from archilab. That should let you populate your schedule with the data. Also take a look at the posts below. They provide some additional information. There may be other posts about this subject in the forum also. > [@Dynamo Graph from Excel to Key Schedule](https://forum.dynamobim.com/t/dynamo-graph-from-excel-to-key-schedule/30254): > > Trying to use what Dana DeFillipi did in her[Automating Occupancy class at AU](https://www.autodesk.com/autodesk-university/class/Automating-Occupancy-Smarter-Way-2018) this year for Function of Space (Occupancy) and modify it for Egress Width (doors). I have the following information in Excel: [CR\_Set Up Egress Width Key.xlsx](https://forum.dynamobim.com/uploads/short-url/afX4f5tictGD5BxWAUhVx4IohSN.xlsx) (281.2 KB) The following Dynamo graph: [CR\_Set Up Egress Width Key.dyn](https://forum.dynamobim.com/uploads/short-url/Eau9gCtz1Ku5V9DHzWYacmjNRa.dyn) (37.4 KB) But i get this when the graph plays in Revit: [https://we.tl/t-ZoNBXHnGe6](https://we.tl/t-ZoNBXHnGe6) If ya’ll could assist me, I’d appreciate it! > [@Excel to Revit Key Schedule (Dynamo)](https://forum.dynamobim.com/t/excel-to-revit-key-schedule-dynamo/70579): > > Does anyone know how to link a table from an excel sheet to a Revit Key Schedule using dynamo? --- _[View the full topic](https://forum.dynamobim.com/t/add-rows-data-to-key-schedule/89015)._