# Adaptive Component Behavior

**URL:** <https://forum.dynamobim.com/t/adaptive-component-behavior/4292>\
**Category:** Uncategorized\
**Tags:** revit\
**Created:** [June 2, 2016, 1:16pm UTC](https://forum.dynamobim.com/t/adaptive-component-behavior/4292 "2016-06-02T13:16:59Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Michael\_Forrest1](https://avatars.discourse-cdn.com/v4/letter/m/b5e925/32.png) [@Michael\_Forrest1](https://forum.dynamobim.com/u/Michael_Forrest1)\
**Post date:** [June 2, 2016, 1:16pm UTC](https://forum.dynamobim.com/t/adaptive-component-behavior/4292/1 "2016-06-02T13:16:59Z")

</div>

I’m placing a two point adaptive component using Dynamo, for some reason when placed with Dynamo the ends of the component are cut at a strange angle. Has anyone got any idea where i;m going wrong? If i place the family in Revit by two points it cuts how I want it.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/e/eff6571310bfad89670e7abd864a299a5e6777e8.png)

Second image is how i want it to cut the family

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/6/662733f7cc81aa87bf2bb60305d4dcdb28f5894b.png)

---

<div class="post-metadata">

**Author:** ![Thomas\_Mahon](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/thomas_mahon/32/64209_2.png) [@Thomas\_Mahon](https://forum.dynamobim.com/u/Thomas_Mahon)\
**Post date:** [June 2, 2016, 1:25pm UTC](https://forum.dynamobim.com/t/adaptive-component-behavior/4292/2 "2016-06-02T13:25:29Z")

</div>

Simple answer: rebuild the AC and make it more robust (increase adaptive points and use more reference lines). 2 points for any AC usually results in these types of problems and that’s just using Revit. Add Dynamo to the mix and ACs with few references become even more unpredictable.

---

<div class="post-metadata">

**Author:** ![Michael\_Forrest1](https://avatars.discourse-cdn.com/v4/letter/m/b5e925/32.png) [@Michael\_Forrest1](https://forum.dynamobim.com/u/Michael_Forrest1)\
**Post date:** [June 2, 2016, 1:33pm UTC](https://forum.dynamobim.com/t/adaptive-component-behavior/4292/3 "2016-06-02T13:33:15Z")

</div>

Yes, similar to another discussion that’s going on I see, I was building the adaptive component from a face based generic model, the profile of which is also read by Dynamo, you can’t even copy and paste linework into an adaptive component from a profile so i’d have to trace over this imported profile ☹

Thanks anyway

---

<div class="post-metadata">

**Author:** ![Michael\_Forrest1](https://avatars.discourse-cdn.com/v4/letter/m/b5e925/32.png) [@Michael\_Forrest1](https://forum.dynamobim.com/u/Michael_Forrest1)\
**Post date:** [June 2, 2016, 2:07pm UTC](https://forum.dynamobim.com/t/adaptive-component-behavior/4292/4 "2016-06-02T14:07:20Z")

</div>

Fixed it! Thanks to @Daniel_Woodcock1 in my office, i’m new to adaptive components… needed to lock it to the plane of a reference line drawn between the adaptive points.

 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/0/030e42e6b668e0b7c2e287ffb79164c61d5f6165.png)  
 ![](https://us1.discourse-cdn.com/flex022/uploads/dynamobim/original/2X/b/bab892c9c4fa7711d2d1ec918657964445261060.png)

---

<div class="post-metadata">

**Author:** ![Daniel\_Woodcock1](https://avatars.discourse-cdn.com/v4/letter/d/58f4c7/32.png) [@Daniel\_Woodcock1](https://forum.dynamobim.com/u/Daniel_Woodcock1)\
**Post date:** [June 2, 2016, 2:11pm UTC](https://forum.dynamobim.com/t/adaptive-component-behavior/4292/5 "2016-06-02T14:11:02Z")

</div>

No worries @Michael_Forrest1. Awesome connection and super flexible too. Nice one. 😉
