# Access Sweep Curve Geometry in a Family

**URL:** <https://forum.dynamobim.com/t/access-sweep-curve-geometry-in-a-family/14819>\
**Category:** Geometry\
**Created:** [September 14, 2017, 2:47pm UTC](https://forum.dynamobim.com/t/access-sweep-curve-geometry-in-a-family/14819 "2017-09-14T14:47:10Z")\
**Posts on this page:** 1\
**Showing post:** 18

<div class="post-metadata">

**Author:** ![Kulkul](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.dynamobim.com/kulkul/32/49801_2.png) [@Kulkul](https://forum.dynamobim.com/u/Kulkul)\
**Post date:** [September 15, 2017, 2:05pm UTC](https://forum.dynamobim.com/t/access-sweep-curve-geometry-in-a-family/14819/18 "2017-09-15T14:05:37Z")

</div>

Hi @Justin_Dias

> [@Justin\_Dias](#):
>
> but it seems this isn’t possible so unfortunately I will end up recreating that curve based on the actual swept geometry like you mention.

May be not. Take a look at this

[Trouble with PolyCurve By Profile Family Type - #6 by Kulkul](https://forum.dynamobim.com/t/trouble-with-polycurve-by-profile-family-type/6591/6)

if you still don’t see curves drop your family here.

---

_[View the full topic](https://forum.dynamobim.com/t/access-sweep-curve-geometry-in-a-family/14819)._